This is the finest made temp Sensor fitting we have ever offered! This is a special stop fitting that can be used to measure the temperature of your water cooling loop.

An attractive temperature monitoring solution that can easily fit anywhere inside a case or be mounted to the front of a case using an XSPC Temperature Sensor Frame

The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. The LT version has no screen but retails all of the features that the software offers.

The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. The Pro version has the benefits of the screen

An attractive temperature monitoring solution that can easily fit anywhere inside a case or be mounted to the front of a case using an XSPC Temperature Sensor Frame

This temperature sensor has a G1 / 4 thread and can be used with any hoses with suitable connectors. The sensor has a 60cm connection cable and a two-pin plug.

An attractive temperature monitoring solution that can easily fit anywhere inside a case or be mounted to the front of a case using an XSPC Temperature Sensor Frame

The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. The XT Version comes with a touch control system

The ideal modification that fits the front of any case. Holds two XSPC temperature sensors

Corsair Link gives you ultimate control — your system, your rules.

Replacement bezel for an Aquaero 5 PRO. The Aquaero 5 PRO ships with a stainless steel bezel, using this black anodized aluminum bezel, the aquaero perfectly matches any black PC case.

Includes LCD display and temperature sensor wire

Corsair Link gives you ultimate control — your system, your rules.

Replacement bezel for an Aquaero 5 XT. The Aquaero 5 XT ships with a stainless steel bezel, using this black anodized aluminum bezel, the aquaero perfectly matches any black PC case.

Includes LCD display and temperature sensor wire

Aqua Computer Aqua remote infrared remote control for aquaero 5

Corsair Link gives you ultimate control — your system, your rules.

Support system for Aquabox Resevoir

Includes LCD display and temperature sensor wire

This connection cable can be used for aquabus connection between Aqua Computer devices or for connecting a RPM signal output to a suitable fan connector.

Includes LCD display and temperature sensor wire

This material kit allows the installation of a aquaero 5 LT (not included) drive bay into a free 5.25 inch. A front panel is not included here, the existing housing panel continue to be used.

Includes LCD display and temperature sensor wire

Includes LCD display and temperature sensor wire

Mounted on an aquaero 5 controller, this passive heat sink improves the heat dissipation and thereby increases the maximum power output of the fan channels.

Mounted on an aquaero 5 controller, this water block improves the heat dissipation and thereby significantly increases the maximum power output of the fan channels.

Includes LCD display and G1/4" temperature sensor plug

The poweradjust 2 is optimized primarily for the control of Laing DDC pump, but other consumers with up to 25W continuous power at 12 volts can be connected to the controller.

Includes LCD display and G1/4" temperature sensor plug

This plug can be used to connect cables to the aquaero 5

Includes LCD display and G1/4" temperature sensor plug

Includes LCD display and G1/4" temperature sensor plug

Includes LCD display and G1/4" temperature sensor plug

G1/4" plug with built in temperature sensor

Wire sensor with two pin plug and 50cm sleeved cable.

Includes LCD display, T fitting, and G1/4" temperature sensor plug

Includes LCD display, T fitting, and G1/4" temperature sensor plug

Includes LCD display, T fitting, and G1/4" temperature sensor plug

Includes LCD display, T fitting, and G1/4" temperature sensor plug

Includes LCD display, T fitting, and G1/4" temperature sensor plug