OcUK
Overclockers UK - 5 Lymedale Cross - Newcastle-under-Lyme - Staffordshire - ST5 9BT - Telephone: 01782 444455 *

Lamptron FC2 5.25" Bay Fan Controller - Black

Stock Code: BB-000-LP
Manufacturers Code: LAMP-FC0022H
Write a ReviewCustomer Rating:Average rating of 5.0

This device can control 6 channels that supports up to 45 watts each, CNC milled faceplate from blocks of 3/4" thick aluminium, and blue leds behind each knob.


Out of Stock

£24.98 inc VAT
£20.82 ex VAT

Quantity:

You own this product? Write a Review

Filter Reviews

Period

last 2 weeks (0)

last 6 month (0)

all reviews (5)

Reviews

80%(4)

20%(1)

0%(0)

0%(0)

0%(0)

Top gearI can add nothing to the other reviews all I can really do is concur with each and every one of them. A superb product , I couldn't recomend it enough .09/03/2013

Great control;lerFantastic controller, very nice build quality, excellent long black braided cables, for the price this is a bargain and should be bought asap!15/07/2012

Showing Reviews 1 - 5 of 5

Sort by: 
  • Uwe Ramsell09.03.2013 | 22:34

     

    Top gearI can add nothing to the other reviews all I can really do is concur with each and every one of them. A superb product , I couldn't recomend it enough .189 User found this Review usefullHelpful Review? Yes

  • Joe15.07.2012 | 00:58

     

    Great control;lerFantastic controller, very nice build quality, excellent long black braided cables, for the price this is a bargain and should be bought asap!137 User found this Review usefullHelpful Review? Yes

  • Luke27.04.2012 | 22:30

     

    Does the job6 channels, plenty of power for daisy chaining and decent aesthetics. Comes with 6 x 3-Pin extensions also.

    Loses 1 point for the following:
    Extensions are provided but in no shape or form braided/dyed (black would of been nice but stuck with red/yellow unless you DIY)

    Some of the knobs were pushed on far too tight and were flush against the front panel. I tested one and it was touching the alu and marked it a little. Had to pull it off and re-set height.

    Big annoyance - the 3-Pin headers are labelled in reverse. It says 1 on the PCB behind knob 6 and I trusted the markings - against my better judgement. It means the fans are attached in reverse numbered order now and start from the right of the fascia and progress leftwards....will have to pull out and re-jig.

    Has not 1 but two molex female passthroughs....why? 1 is enough and personally I would of preferred none. internal cable management annoyance but does not affect functionality.135 User found this Review usefullHelpful Review? Yes

  • robert17.02.2011 | 20:08

     

    superbrunning 8 different fans over six channels and it has not let me down. i have read some bad reviews about this product but all are undeserved as far as i am concerned134 User found this Review usefullHelpful Review? Yes

  • Craig26.06.2012 | 12:10

     

    Good qualityThe controller is a good looking piece of equipment and very easy to use.

    I'm pretty sure Luke on a seperate review here on OC has had a different version to me, maybe they have done revised version of the product since, because the extension cables provided are very good quality, braided in black. The fan plugs are in order of the number controllers. All the correct way.

    If I was to try and fault the controller... maybe the blue LEDs that change depending on how fast you have your fans going at aren't as uniform as I'd like them to be.

    Not used in a computer, it is being used within a shelf to cool AV Equipment with a modded 12v Laptop PSU.131 User found this Review usefullHelpful Review? Yes

Sort by: 

Write a Review

Copyright � 2006 - 2014 | www.overclockers.co.uk | Overclockers UK (Ocuk Ltd) | All rights reserved
Company Number 03869866 | VAT Number GB 747 9639 69
FaderUK MaestroMasterCardPayPalVisaVisa DebitVisa ElectronFader
All on-line orders are placed via our SSL enabled Secure Server.

* Calls charged at standard rate, contact your service provider for more information.
Lines open 8.30am to 5.30pm Monday to Friday and 9.00am to 5.00pm Saturday