OcUK
Overclockers UK - 5 Lymedale Cross - Newcastle-under-Lyme - Staffordshire - ST5 9BT - Telephone: 01782 444455 *

Lamptron FC Touch Fan Controller - Black

Stock Code: BB-004-LP
Manufacturers Code: LAMP-FC0092H
Write a ReviewCustomer Rating:Average rating of 5.0

The Lamptron FC Touch brings smart touch screen functionality to your fingertips for fan control.


Out of Stock

£49.99 inc VAT
£41.66 ex VAT

Quantity:

You own this product? Write a Review

Filter Reviews

Period

last 2 weeks (0)

last 6 month (1)

all reviews (4)

Reviews

75%(3)

25%(1)

0%(0)

0%(0)

0%(0)

Good Fan ControllerGood Fan Controller except that when run in Manual mode the RPM is not reported correctly if the Voltage is less than 4v (33%)24/01/2012

LamptronLooks and work really well. The only thing you need to consider is: once installed you need to fill gap between the actuall device and upper 5.25'' drive bay ( I used a black thin strip of sponge) Otherwise it will look ugly due to light coming from the LCD. Also if you have a chassis with drive bay clips like Crosair D650 you may not be able to mount it straight away ( The device is not long enough to clip it). Recommended.31/05/2011

Showing Reviews 1 - 4 of 4

Sort by: 
  • Groover24.01.2012 | 13:35

     

    Good Fan ControllerGood Fan Controller except that when run in Manual mode the RPM is not reported correctly if the Voltage is less than 4v (33%)313 User found this Review usefullHelpful Review? Yes

  • MArcinO31.05.2011 | 14:59

     

    LamptronLooks and work really well. The only thing you need to consider is: once installed you need to fill gap between the actuall device and upper 5.25'' drive bay ( I used a black thin strip of sponge) Otherwise it will look ugly due to light coming from the LCD. Also if you have a chassis with drive bay clips like Crosair D650 you may not be able to mount it straight away ( The device is not long enough to clip it). Recommended.302 User found this Review usefullHelpful Review? Yes

  • 01.04.2014 | 00:35

     

    set and leaveI purchased the lamptron touch but i had to return due to it not saving,I sent it back and with in days with no messing around overclockers sent me another as a replacement,I installed it i set the auto perimeter and booted and it as saved my profile and doing just what it should be doing so i am very happy with it so thank you overclockers for sorting it out with no fuss.145 User found this Review usefullHelpful Review? Yes

  • 06.05.2014 | 09:39

     

    Excellent.I came from a Bit Fenix Recon, which as you may or may not know is a touch screen controller also. The Recon beeps at every button press, and has probably the worst screen of any fan controller I have come across, the viewing angles are terrible. I also found it couldn't run my PWM fans at the speeds I wanted, it was just terrible.

    I then went for the Lamptron FC Touch as I figured all touch screens were the same as the Recon, but it had the faulty speed control, all the voltage was in the middle 5% of the dial, if it was turned 50% it would power about 3v, then the next 5% would power up to ~10-11v and the last 45% was the final 1-2v.
    Every time the computer was turned off the controller would pic a different speed as it was so twitchy. A common fault with the FC5 I'm told.

    The Touch howerver, set it, and forget about it, it's that simple. It's got a GREAT screen, with great viewing angles, It's so easy to change speeds and they STAY there.

    The only niggle I have with it is the display isn't overly attractive, the functionality is 100% there, but it just looks a little, dare I say, dated, but that's fine as it does such a good job. 99% of the time the screen is off anyway. ;-)

    Overall I would say you couldn't get a better controller, if you're thinking of buying it, buy it. You will not be disappointed.143 User found this Review usefullHelpful Review? Yes

Sort by: 

Write a Review

Copyright � 2006 - 2014 | www.overclockers.co.uk | Overclockers UK (Ocuk Ltd) | All rights reserved
Company Number 03869866 | VAT Number GB 747 9639 69
FaderUK MaestroMasterCardPayPalVisaVisa DebitVisa ElectronFader
All on-line orders are placed via our SSL enabled Secure Server.

* Calls charged at standard rate, contact your service provider for more information.
Lines open 8.30am to 5.30pm Monday to Friday and 9.00am to 5.00pm Saturday