All mats are pre-cut and fit exactly in the planned position. It is not necessary to install all of them. Thus it is more important to achieve a balance of cooling and dampening, also depending on the hardware installed.
The more heat is exposed from hardware the more openings and fans are needed for its cooling. Each case opening provides a way for the sound to reach the outside and there with be perceived as noise. Depending on how comprehensive the covering of the housing with dampening mats is, the quieter it is.
There are three levels of dampening - the first should be installed in any case the second only if you don´t use additional fans and very effective hardware is installed. The first stage includes the right side panel, front part of the left side panel, upper front, the whole floor, a part of the top cover and the middle part of the backside backside. Second stage would include the rear part of the left side panel, the middle and the lower front. In the last stage the fans in the top cover and the back are replaced by dampening mats.
- Compatible with All BitFenix Shinobi Case
- 8 Sepeate Foam Pads
- Pre cut to size to dampen every part of your BitFenix Shinobi
- Finely punched imitation leather
- Self adhesive tape pre-applied
Copyright ï¿½ 2006 - 2014 | www.overclockers.co.uk | Overclockers UK (Ocuk Ltd) | All rights reserved
Company Number 03869866 | VAT Number GB 747 9639 69
All on-line orders are placed via our SSL enabled Secure Server.
* Calls charged at standard rate, contact your service provider for more information.
Lines open 8.30am to 5.30pm Monday to Friday and 9.00am to 5.00pm Saturday
Sales - UK 01782 444455
Sales - International +44 1782 444455
Support - UK 01782 444455
Support - International +44 1782 444455
Systems Support - UK 01782 444455 (Mon-Fri only)
Systems Support - International +44 1782 444455 (Mon-Fri only)
From the UK 01782 565746
International +44 1782 565746
Overclockers UK (Ocuk Ltd)
Unit 5 Lymedale Cross
Lower Milehouse Lane
Staffordshire ST5 9BT