The
Dawn TG is an elegant Midi-Tower with numerous innovative features from the case professionals at
BitFenix. Behind the
coated tempered glass lies a mesh complete with unique patterns, which extends to the right side. Drawing inspiration from the name, the digitally addressable RGB lighting behind it emits light that gives the impression of a sunrise shining through a window. The lateral strip on the left includes large
air inlets to help ensure good airflow. The upper side has a
large honeycomb mesh with a magnetic dust filter, beneath which a 240 mm radiator can be installed. Alternatively, the dust filter can be replaced by a solid cover.
Three quiet 120 mm fans are included in the package from
BitFenix. The fan at the rear is from the
in-house Spectre series and is equipped with RGB lighting that fills the interior of the case and can be seen through the two tempered glass side panels. Additionally, the case can even support
E-ATX motherboards and includes plenty of room for optimal cable management. The highlight, however, is the ability to install the graphics card vertically, which can also be up to 380 millimetres long.
The Features of the BitFenix Dawn TG Midi-Tower at a Glance:
- Super stylish Midi-Tower for motherboards up to E-ATX
- Addressable RGB-LED lighting and controller at the front
- Front and both sides in coated tempered glass
- I/O Panel with 1x USB 3.1 Type C and 2x USB 3.0 & HD Audio In/Out & RGB switch
- Support for three radiators in 360-/280-, 240- and 120 mm formats
- 2x 3.5/2.5“ & 4x 2.5“ drive slots
- 3x 120 mm fans pre-installed, 1x RGB-LEDs – total of 7 possible
- Supports GPUs up to 38 cm in length & CPU coolers 16.5 cm tall
Stylish Midi-Tower with RGB-LED Lighting and Lots of Tempered Glass
The exterior of the case is as eye-catching as its interior thanks to the
tempered glass on both sides as well as the front of the case. This is where BitFenix has added there own innovative touch, in the form of
protective foil for the glass, similar to the kind used in the automotive industry. This prevents the glass from splintering should it be broken, and the glass itself remains extremely clear to maximise the impact of RGB-LED components. With a compatible motherboard, RGB-LEDs on the front, as well as the lighting of the rear-facing RGB-LED fans, can be quickly and easily configured via software. They can even be synchronised with other RGB components to make for some stunning lighting effects and patterns. Alternatively, the
integrated controller means that users will also be pleased to note the presence of
a switch on the I/O panel.
The interior of this spacious Midi-Tower supports motherboards from
Mini-ITX- all the way up to
E-ATX form factors.
Two 3.5- or 2.5“ drives can be stowed away beneath the
PSU shroud thanks to the included brackets, while
four further 2.5“ slots lie behind the motherboard tray. Your hardware and cooling gear will enjoy a clean, uncluttered look from behind the left side panel. Behind the motherboard tray lies 28 mm of space for cable management.
Plenty of Space for Cooling and Powerful Hardware in the Bitfenix Dawn TG
The rear of the case is equipped
with a 120 mm RGB fan, while the front includes two standard fans without lighting to ensure a steady stream of fresh air. Moreover, the
roof of the case allows for two fans and the front supports a total of three 120 mm fans. One additional fan can be installed at the bottom to the rear of the power supply. The front or on the roof supports two 140 mm models. The air vents in the front, bottom and roof are all equipped with
removable dust filters that do not require tools to remove.
The front of the
Bitfenix Dawn TG is compatible with
240- or even 360- or 280 mm format radiators with a thickness of 35 mm and a width of 141 mm. In the case of large radiators, a section of the PSU shroud can be removed.
The roof even has space for a further radiator up to 280 mm in length, while at the rear, the pre-installed fan can be replaced with a 120 mm radiator. CPU coolers can be up to 16.5 cm tall and
powerful graphics cards up to a length of 38 cm will fit inside. The PCI bracket to the rear with its seven horizontal slots can be replaced
with a four slot vertically oriented bracket if preferred.
Please do not remove the protective foil from the tempered glass panels.
Technical Details:
- Dimensions: 220 x 485.5 x 449 mm (W x H x D)
- Material: Steel, plastic, tempered glass
- Weight: approx. 8 kg
- Colour: Black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
- Total possible fans:
3x 120 mm / 2x 140 mm (Front)
1x 120 mm (rear)
1x 120 mm (bottom)
2x 120 mm/140mm (roof) - Pre-installed:
2x 120 mm (front)
1x 120 mm (RGB-LEDs, rear) - Radiator Mounting:
max. 1x 360 mm or 1x 280 mm (Front, max. 35 thick, max. 141 widths)
max. 1x 240 mm oder 1x 280 mm (roof)
1x 120 mm (rear) - Dust filter: Roof, front, bottom
- Drive bays:
2x 3.5/2.5“ (internal)
4x 2.5“ (internal) - Power supply: 1x Standard ATX up to 220 mm (optional)
- Expansion slots: 7 or 4 with bundled replacement bracket
- I/O Panel:
1x USB 3.1 (internal connection)
2x USB 3.0 (internal connection)
1x Audio In/Out
1x RGB controller
1x Reset
1x Power
2x LED - Max GPU length: 380 mm
- Max CPU cooler height: 165 mm
- RGB Controller connections:
1x 4-Pin RGB
2x 3-Pin RGB
1x Front Button
1x SATA power cable - RGB compatibility:
ASUS Aura Sync
ASRock Polychrome Sync
Gigabyte RGB Fusion 2.0
MSI Mystic Light Sync
