Phanteks Glacier One 240T30 Premium All In One CPU Water Cooler D-RGB Black - 240mm

The Phanteks Glacier One 240 T30 is a premium quality AiO CPU cooler, featuring a 240mm radiator. The heat sink has two powerful T30-120 fans as well as a PWM pump. The result is a compact and stylish AiO cooler that is compatible with most Intel and AMD chipset. Its aesthetics are yet further enhanced by digitally addressable RGB lighting that pairs effectively with its infinity-effect mirror.

The Phanteks Glacier One 240 T30 AiO Liquid Cooler at a Glance:

• Stylish AiO (All-in-One) CPU cooler
• Includes 240mm aluminium radiator
• Features two 120mm T30-120 premium fans
• Quiet yet high performance pump with PWM control
• D-RGB lighting and infinity-effect mirror

The Phanteks Glacier One 240 T30 AiO Liquid Cooler in detail:

The Phanteks Glacier One 240 T30 combines the best components to make an outstanding AiO CPU cooler. To begin with, it has a premium dual radiator CPU cooler. Constructed from aluminium, it has a heat sink with a fin density of 21 FPI. Meaning, there is a large cooling surface despite a relatively small surface area.

This combines with high-performance T30-120 fans to offer significant cooling even for high-performance processors. The fans are 30mm deep, which allows the fan blades to increase height in height by 25% compared to typical fans. They also achieve a high static pressure, and can manage up to 101 m³/h of airflow.

Moving on the pump, like the fans, it is PWM-controlled. The ensures high-performance, but also quiet, operations. Typically the pump reaches up to 2,800 rpm but Phanteks have also built an intelligent protection mechanism that increases the speed of the pump to a maximum of 3,600 rpm if coolant exceeds a temperature of 60°C. Thereby protecting your high-performance hardware.

There are three different profile settings available: Advanced, Performance and Hybrid. These modify the RPM, airflow and static pressure depending on your preference for maximizing for performance, cooling or volume.

A particular highlight of this AiO cooler is the combined D-RGB lighting and infinity effect mirror design. A total of 14 digitally addressable RGB LEDs generate fantastic illumination effects. Lighting mode can be adjusted by a Phanteks RGB controller or via software.

In addition to the compact design, with a height of just 41 mm, angled tube connections contribute to the high degree of compatibility with motherboards, RAM and other components. With the enclosed clips, the tubes can be easily routed and fixed. All topped off by a stylish cap that can be magnetically attached to the pump housing.

Specification:

• Weight: 1.15 kg
• Colour: Black
• Radiator:
  Dimensions: 273 x 120 x 38 mm (L x W x H)
  Material: Aluminium
  FPI: 21
• Pump:
  Dimensions: 93 x 41 x 92 mm (W x H x D)
  Material: copper, plastic
  Speed: max. 2,800 rpm +/- 300 at 100 % (PWM controlled), 3,600 rpm with coolant above 60 °C
  Bearing: ceramic
  Noise level: max. 27 dB(A)
  Cable length: 245 mm
  Power consumption: 2 V, 0.3 A, 3.6 W
  Life expectancy: 50,000 hours
• Pump cover:
  Material: Plastic, tempered glass
  RGB lighting: 3-pin digital RGB LED (5V, Data, Ground)
  Amount: 14 RGB LEDs
  Current: 5 V, 0.42 A, 2.1 W
  RGB cable length: 550 mm + 75 mm daisy-chain
• Tubes:
  Length: 400 mm (sleeved)
  Diameter: 11 mm
  Material: EPDM
  Special features: 3 clips included, movable fittings
• Fans:
  Type: 2x 120 mm (T30-120)
  Dimensions: 120 x 30 x 120 mm (W x H x D)
  Weight: 230 g
  Colour: Black
  Material: Liquid crystal polymer (frame, rotor), rubber (vibration dampers)
  Bearing: Dual Vapo
  
  Advanced profile:
  Speed: 3,000 ±150 rpm
  Airflow: 171.4 m³/h
  Static pressure: 7.11 mmH2O
  Noise: 39.7 dB(A)
  Current: 0.36 A
  Power consumption: 4.32 W
  
  Performance profile:
  Speed: 2,000 ±100 rpm
  Airflow: 113.6 m³/h
  Static pressure: 3.3 mmH2O
  Noise: 27.3 dB(A)
  Current: 0.13 A
  Power consumption: 1.58 W
  
  Hybrid profile:
  Speed: 1,200 ±75 rpm
  Airflow: 66.4 m³/h
  Static pressure: 1.27 mmH2O
  Noise: 11.1 dB(A)
  Current: 0.05 A
  Power consumption: 0.55 W
  
  Operating voltage: 10.2 to 13.2 V
  Connection: 4-pin PWM (daisy chain)
  Cable length: 130 mm + 500 mm extension cable
  MTTF: 150,000 h
• Compatibility:
  Intel socket: 1700, 115x, 1200, 1366, 2011(-V3), 2066
  AMD socket: AM4, sTRX4, TR4 (bracket not included)
• Manufacturer warranty: 6 years