+44 (0)1782 44 44 55
QS-183 Advance Micro-ATX Case - BlackAerocool's Qs-183 is a stylish Micro-ATX case that offers attractive matte surfaces and a robust design. Approximately 33.5 cm tall and 35.5 cm deep, this is a surprisingly compact case and weighs in at just 2.7 kg. The quality materials and stylish design make this case look right at home in a living room or office environment.
The Aerocool Qs-183 Advance Micro-ATX Case at a Glance:
- Compact Micro-ATX case in black
- Compatible with Micro-ATX- and Mini-ITX format motherboards
- 1x 5.25" / 3x 2.5" / 1x 3.5" or 1x 5.25" / 2x 2.5" / 2x 3.5"
- Pre-installed 80 mm fan (two more 120 mm slots available)
- I/O panel with 2x USB 3.0, HD Audio ports & SD card reader
- Supports graphics cards up to 320 mm in length
- Supports CPU coolers up to 150 mm in height
Compact Micro-ATX Case with Attractive DesignThis compact tower is made from 0.5 mm thick SECC steel and clad with plastic on the front and roof. The front conceals a drive bay behind which a 5.25" slot is available for optical drives. Furthermore, the I/O panel is equipped with two USB 3.0 ports, two audio jacks, an SD card reader as well as a power and a reset switch.
The black interior of the Qs-183 Advance holds sufficient space for Micro-ATX and Mini-ITX motherboards as well as a range of different components. As such a 3.5" and a 2.5" drive will also fit in the Qs-183 Advance as standard.
The 3.5" drive is also externally accessible, given that the slot sits behind a removable bracket. Additionally, either two further 2.5" or one 2.5" and one 3.5" drive can be installed into the small fold-out side wall.
If users forego a 5.25" drive, a 3.5" can be used in its stead. Rubber pads are included with the case so that no or only a small amount of vibration occurs.
The case is also capable of holding a total of four expansion cards. These may be up to a maximum length of 320 mm. A CPU cooler meanwhile can have a height of up to 150 mm. Of course, the case also includes a handy cut-out to make CPU cooler installation and maintenance as easy as possible. A standard ATX-format power supply can be installed in the roof of the case towards to the rear. Beneath this is a removable dust filter.
The case comes with a pre-installed 80 mm fan in the back. The side and front of the case each allow for the installation of a 120 mm fan. Cut-outs are included in the motherboard tray to support optimal cable management.
- Dimensions: 170 x 335 x 355 mm (W x H x D)
- Material: Steel (Body), Plastic (Front, Roof)
- Weight: approx. 2.7 kg
- Colour: Black
- Form factor: Micro-ATX, Mini-ITX
- Optional fans:
1x 120 mm (front)
1x 120 mm (left side)
1x 80 mm (rear)
- Pre-installed Fan:
1x 80 mm (Rear; 1800 RPM, 48 m³/h, 21 dB(A))
- Filter: PSU (removable)
- Drive Bays:
1x 5.25" (external)
1x 3.5" (internal)
1x 2.5" (internal; bottom)
2x 2.5" or 1x 3.5 + 1x 2.5" (internal)
- PSU: 1x Standard ATX (optional)
- Expansion slots: 4
- I/O Panel:
2x USB 3.0 (internal connection)
1x HD Audio (In/Out)
1x SD Card reader
- Max GPU length: 320 mm
- Max CPU cooler height: 150 mm