+44 (0)1782 44 44 55
QS-183 Advance Micro-ATX Case - RedAerocool's Qs-183 is a stylish Micro-ATX case which impresses with its use of matte surfaces and attractive design. At roughly 33.5 cm tall and 35.5 cm deep, this is a highly compact case that weighs just 2.7 kg and will blend perfectly into a living room style environment.
The Aerocool Qs-183 Advance Micro-ATX Case at a Glance:
- Compact Micro-ATX case in black / red
- Fits Micro-ATX- and Mini-ITX motherboards
- 1x 5.25" / 3x 2.5" / 1x 3.5" or 1x 5.25" / 2x 2.5" / 2x 3.5"
- Pre-installed 80 mm fan (two further 120 mm slots available)
- I/O Panel with 2x USB 3.0, HD Audio ports & SD card reader
- Fits graphics cards up to 320 mm long
- Compatible with CPU coolers up to 150 mm tall
Compact Micro-ATX Case with Attractive DesignThis compact tower is made from 0.5 mm thick SECC steel and clad with plastic on the front and roof. The front conceals a drive bay behind which a 5.25" slot is available for optical drives. Furthermore, the I/O panel is equipped with two USB 3.0 ports, two audio jacks, an SD card reader as well as a power and a reset switch.
The black interior of the Qs-183 Advance holds sufficient space for Micro-ATX and Mini-ITX motherboards as well as a range of different components. As such a 3.5" and a 2.5" drive will also fit in the Qs-183 Advance as standard.
The 3.5" drive is also externally accessible, given that the slot sits behind a removable bracket. Additionally, either two further 2.5" or one 2.5" and one 3.5" drive can be installed into the small fold-out side wall.
If users forego a 5.25" drive, a 3.5" can be used in its stead. Rubber pads are included with the case so that no or only a small amount of vibration occurs.
The case is also capable of holding a total of four expansion cards. These may be up to a maximum length of 320 mm. A CPU cooler meanwhile can have a height of up to 150 mm. Of course, the case also includes a handy cut-out to make CPU cooler installation and maintenance as easy as possible. A standard ATX-format power supply can be installed in the roof of the case towards to the rear. Beneath this is a removable dust filter.
The case comes with a pre-installed 80 mm fan in the back. The side and front of the case each allow for the installation of a 120 mm fan. Cut-outs are included in the motherboard tray to support optimal cable management.
- Dimensions: 170 x 335 x 355 mm (W x H x D)
- Material: Steel (Body), Plastic (Front, Roof)
- Weight: approx. 2.7 kg
- Colour: Black / Red
- Form factor: Micro-ATX, Mini-ITX
- Optional fans:
1x 120 mm (front)
1x 120 mm (left side panel)
1x 80 mm (rear)
- Fans Pre-Installed:
1x 80 mm (Rear; 1800 RPM, 48 m³/h, 21 dB(A))
- Filter: PSU (removable)
- Drive Bays:
1x 5.25" (external)
1x 3.5" (internal)
1x 2.5" (internal; bottom)
2x 2.5" or 1x 3.5 + 1x 2.5" (internal)
- PSU: 1x Standard ATX (optional)
- Expansion slots: 4
- I/O Panel:
2x USB 3.0 (internal connection)
1x HD Audio (In/Out)
1x SD Card reader