+44 (0)1782 44 44 55
V3X RGB Midi Tower Case - Black WindowAerocool traditionally designs cases with an eye towards customers who prefer aggressive yet stylish designs, yet who don't want their new case to cost the earth either. Their new V3X Series hits the sweet spot between the two with its solid, space-saving Midi-Tower tower design and classic layout interior brings you all the essential features you need while looking great at the same time. Apart from the stylish RGB-LED lighting, this variant includes an acrylic glass window in the left side panel.
The Features of the Aerocool V3X RGB at a Glance:
- Stylish Midi-Tower for motherboards up to ATX
- Two side-facing RGB strips in the front
- Three 5.25" slots on the front
- Graphics cards up to 350 mm, CPU coolers up to 150 mm
- A pre-installed 80 mm fan in the rear
- One free 120 mm fan slot
Plenty of Space for Optical DrivesThe V3X RGB impresses users with its stylish black front, the mesh front section, and the glossy black 5.25" bays. Two can hold optical drives. An I/O panel is situated at the top of the case with USB 3.0, two USB 2.0, audio connectors, status LEDs and the obligatory power/ reset buttons. The highlight of the case can certainly be said to be the RGB-LED strips that illuminate the lower left and right side of the front of the case. A total of six modes and seven colours can be switched between by using the centrally located switch.
The tidy look of the case offers a symmetrical design and clean lines, the left side panel includes an acrylic glass window, and behind this, users are free to install a CPU cooler up to 150 mm in height, something that is quite impressive for a narrow case. The case is capable of holding graphics cards with a length of up to 350 mm making the Aerocool V3X RGB a great choice for gaming hardware.
Excellent AirflowAn additional 120 mm fan slot is located behind the mesh in the front and behind this, a pre-installed 80 mm fan takes care of excess warm air. Efficient airflow through the case is easily achieved and your expensive gaming hardware will enjoy the benefits from this in terms of their operating life. Up to two 5.25" drives and up to three 3.5" hard drives and one 2.5" SSD will fit in the Aerocool V3X RGB.
The interior is completely black, including the tray that holds ATX- Micro-ATX-, and Mini-ITX motherboards. For convenient swapping of the CPU cooler, the tray includes a large cutout. Furthermore, the drive bays allow hard drives and SSDs to be installed from the side. The PSU is available separately and should be installed at the top of the case towards the rear, thereby also assisting in removing warm air as efficiently as possible.
- Dimensions: 194 x 414,5 x 412 mm (W x H x D)
- Material: Steel, plastic
- Colour: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total possible fans:
1x 120 mm (front)
1x 80 mm (rear)
1x 80 mm (rear)
- Drive Bays:
2x 5.25" (external)
3x 3.5" (internal)
1x 2.5" (internal)
- PSU: 1x Standard ATX (optional)
- Expansion slots: 7
- I/O Panel:
1x USB 3.0
2x USB 2.0
1x Audio In/Out
- Max GPU length: 350 mm
- Max CPU cooler height: 150 mm