+44 (0)1782 44 44 55
Alpenfohn Matterhorn Black CPU Cooler Threadripper Edition - 120mm
The Alpenföhn Matterhorn Threadripper Edition CPU cooler at a glance:
- High end CPU cooler with 6 heatpipes
- Special black coating
- 120 mm WingBoost 2 Premium fan
- Especially for AMD's socket TR4 thread ripper
The design of the Matterhorn Threadripper Edition basically follows the multi-award winning design of the original model, but has been completely finished with a black surface coating. With almost 800 grams without a fan, it is one of the heavyweights among the processor coolers. Six black copper heatpipes are embedded in a black copper base. The U-shaped heatpipes open into four rows in the heat sink, which on the one hand arranges the feed points broader and also more targeted air flow. This is ensured by the lateral seals, which at the same time increase the stability of the slats.
The asymmetric layering of the slats is the central feature of the Matterhorn construction. They are the result of two contradictory requirements: Many and thus dense fins provide good cooling performance, but would greatly impede the air flow and thus demand high fan speeds, which would make the volume unacceptable. Therefore, the fins on the air inlet side are initially very far apart, so that the air flow practically only has to fight against every second fin.
Only in the interior of the cooler then begins the interposed lamella, where the negative flow influence significantly lower. This construction is ultimately realized so that two tapered fin arrangements are shifted into each other offset. In addition to all the functionality, this elaborate layering is also extremely noble.
According to the latest technology
As a fan, Alpenföhn contributes a top-modern representative from the revised "Wing Boost 2" series, which impresses with its PWM connection and the new "S-Shape" blade geometry. This version of the Alpenföhn Matterhorn is specially tailored for AMD thread ripper CPUs and easy and safe to mount thanks to the stable back plate screw connection.
In addition to the mounting material for the sTR4 socket, the Matterhorn Threadripper Edition also offers a tube of the high-performance Permafrost thermal grease from Alpenföhn, a 5-volt and a 7-volt power adapter for additional fan speed control and four fan terminals, thus increasing it if necessary the cooling power still a second fan can be mounted on the heat sink.
- Dimensions: 138 x 158 x 100 mm (W x H x D)
- Material: copper (bottom plate), coated copper (heatpipes), coated aluminum (lamellae)
- Colour: Black
- Heatpipes: 6x Ø 6 mm
- Weight: 940 g (with fan), 774 g (without fan)
- Fan: 1x 120 mm Wing Boost 2 (18,2 dB (A), 500 - 1,500 rpm, 62.3 CFM
- Connections: 4-pin PWM
- AMD TR4
More links for "Alpenfohn Matterhorn Black CPU Cooler Threadripper Edition - 120mm"
CPU Cooler type
4Pin (PWM control)