+44 (0)1782 44 44 55
Alpenfohn Wing Boost 3 White 120mm Addressable RGB High Speed PWM FanThe Wing Boost 3 RGB series combines the many advantages of its famous predecessors with a circular ring of digitally addressable RGB-LED lighting in its outer frame. The eponymous "Wing Boosts" consist of small raised areas on the impeller intake side of the blades that help reduce air turbulence. The fan therefore operates at lower noise levels than conventional fan designs would allow. The triple-set offered here consists of three fans and an RF receiver, splitter cables and a remote control for synchronising the set of fans.
The Features of the Alpenföhn Wing Boost 3 RGB High Speed Fans at a Glance:
- Three 120 mm fans with digitally addressable RGB lighting
- Hydrodynamic bearings for high performance, quiet operation and increased durability
- Optimised rotor blades deliver the perfect balance between static pressure and airflow
- IC Motor control for improved noise levels
- Fan speeds: from 700 to 2.200 RPM
- 4-Pin PWM- and 3-Pin RGB connector
- Includes RGB- and PWM splitter, RF remote and receiver with screws
- ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock Polychrome
Wing Boost 3 RGB High Speed: Powerful 120 mm FansThe Wing Boost 3 RGB High Speed is a PWM-controlled, 120 mmfan that is equally at home when used as a case fan, a CPU cooler or on radiators. The fan operates at speeds of between 700 and 2.200 RPM, achieving an airflow of 132,4 m³/h and a static pressure of 3,24 mm H2O.
The hydraulic bearings and the rubber dampeners in the fan frame help to guarantee the fans operate whisper-quietly, even at low speeds. Noise is also minimised by the addition of integrated IC motor control. Even under full load, the Wing Boost 3 RGB High Speed produces an acceptable level of noise of at most 36,8 dB.
Addressable RGB-LED Lighting in the FrameThe Alpenföhn Wing Boost 3 RGB High Speed is equipped with digitally addressable RGB-LED lighting. The manufacturer has integrated a glowing ring with up to 16,8m colours into the fan frame, which shines a subtle light onto the fan wheel. This can be controlled by means of a 3-pin RGB connector with a compatible motherboard or controller. The Wing Boost 3 RGB High Speed is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.
Included in this set, in addition to the three fans from the Alpenföhn Wing Boost 3 RGB High Speed range are also all the all the necessary accessories to synchronise the PWM signals and the RGB-LED lighting. The lighting can be controlled via the bundled remote control.
- Dimensions: 120 x 120 x 25 mm (W x H x D)
- Material: Plastic, rubber
- Colour: White
- Volume: max. 36,8 dB(A)
- RPM: 700 - 2.200 RPM
- Airflow: max. 132,4 m³/h
- Static pressure: 3,24 mmH2O
- Voltage: 12 V
3-Pin RGB (addressable)
- Lighting: RGB (16,8m colours)
3x Alpenföhn Wing Boost 3 RGB
12x Case screws
12x Radiator screws
1x RF remote
1x RF receiver
1x RGB splitter
1x PWM splitter