+44 (0)1782 44 44 55
Eisbecher 150mm Fluid Reservoir - AcetalProduct Overview:
Reinventing a pipe
The Eisbecher series consists of 20 different reservoirs which differ in the type of application, the size and the exterior. Among these there are ten reservoirs that are made of 99% Plexiglas - this is unique! The main difference, however, is the function of the various pedestals.
- Bubble Down
This is located in the bottom of the expansion tank and effectively prevents the formation of suction and vortex formation, which prevents air bubbles from being sucked in.
- Lighttower riser
The so-called "Lighttower" effect provides an optical experience in every water cooling system. In the Eisbecher, this was used both from below and from above. The water is passed up or down through the riser and injected through eight evenly spaced holes at the end of the tube to the inner wall of the container. This interesting-looking water feature is the so-called Lighttower effect.
The feet known from the ice cover are also used here and give any combination a firm footing.
Two brackets are installed above and below the pipe for mounting in the housing. In these brackets are holes in the distance of a 120 or 140 fan. However, if the container is not to be mounted on fan locations, the brackets can be reduced to the width of the container and there are three M4 threads per bracket available for mounting. Even if the brackets are not used at all, they can be easily removed. This holder can be found in all 20 containers.
- Lighting module
The lighting modules are made of Plexiglas and allow lighting with a 5mm LED. The modules can be inserted into all 1/4 "screw holes.They are used in the lid and partly in the sockets of the containers to create unique lighting effects.
All versions of the container are available in Acetal and Plexi. There is something for everyone.
All containers are available in two different sizes: the 150mm version and the 10cm larger 250mm version. Due to the size comes in the smaller container only a riser coming from below used. The larger container even two, each coming from below and above.
For those who prefer to operate their pump separately, there are two more versions available. The Bubble Down is used here and, depending on the size, one or two riser tubes for the Lighttower effect and two lighting modules from above and below. In addition, three additional LED holes were drilled in the socket for the Plexi version to increase the luminosity. The inlet and outlet for the cooling liquid is duplicated - once from the side and once from below.
The delivery includes:
- 8x M4x8mm screw
- 4x M4 mother
- 2x G1 / 4 "screw plug
- 1x hexagon key 2.5mm
Dimensions 150mm Version:
- Dimensions incl. Bracket (LxWxD): 151 x 136 x 79,5mm
- Dimensions without bracket (LxB): 151 x 60mm
- Plexi tube diameter: 60mm
- Capacity: 180ml