+44 (0)1782 44 44 55
Eissturm Gaming Copper 360mm Water Cooling Kit - Complete kitWith the new Eissturm kits, you get all the components you need to get started in the world of water cooling. The sets are aimed not only at beginners but also at professionals. All components used are optimally matched to each other and come from the high-end series from Alphacool. Alphacool does not compromise on the materials and uses pure copper or brass for all metals. This guarantees outstanding cooling performance. With the set you can play cool your CPU, also they can integrate any graphics card cooler into the circuit. To do this they do not have to drain or rebuild the circuit thanks to an enclosed quick release.
The products in detail:
Radiator: NexXxoS ST30 Full Copper 360 mm
For many years Alphacool has been a leader in radiators. Through the consistent use of pure copper for the cooling fins, atria and the channels, the Alphacool radiators are leaders in performance. The Alphacool NexXxoS radiators offer outstanding performance when using low-speed fans and provide a high power reserve when a lot of heat needs to be dissipated. This allows them to cover a wide range of applications.
CPU Cooler: XPX
The Alphacool Eisblock XPX Cooler has repeatedly been named the most powerful CPU cooler on the market in independent tests. In addition to excellent workmanship, care was taken to ensure that the cooler bottom is large enough for CPUs that rely on eight or more physical CPU cores. If you want to customize your CPU cooler, you can use modding kits from Alphacool. The CPU cover, the screw caps and the support frame can be exchanged for other colors.
The expansion tank Eisstation is a relatively compact AGB solution with integrated pump top. The pump is completely enclosed by the housing while the water is visible in the transparent nylon housing. Nylon is much more resistant than Plexiglas and almost unbreakable. The assembly takes place either in the 5 ¼ "shaft or over a velcro mat which is freely positionable in the housing.
Alphacool has further optimized the classic DDC pump and launched a version of the DDC310 that runs extremely quietly and, in most cases, does not require any further adjustment. The DDC310 is a perfect compromise between performance and volume. It is strong enough to run larger water cycles, but remains so quiet that it is barely noticeable from within a case. The design is slightly more compact than the VPP755, which can be an advantage in very tight enclosures.
Fans Eiswind Pure Edition
The new Eiswind fans in the Pure Edition are based on the globally popular be quiet! Fans. The finely corrugated fan blades ensure optimum airflow and targeted turbulence to minimize noise. The high-quality rifle bearing also contributes to a high level of smoothness. The fans can be controlled via the 4-pin PWM connection. The fans can be controlled over a wide speed range.
Connections and quick release
Alphacool makes no compromises when it comes to connections. All connections come from the High End icicle series and are made entirely of anodized brass. Thanks to the wide ribbed outer surface, it is very easy to screw in the connections. The union nut presses the hose firmly to the connection and contributes to the safety, because so the hose can only be demolished with a considerable force. The enclosed quick release makes the set Eisbaer Ready. Many products such as the Ice Wolf GPX-Pro cooler, the external water-cooling solution Eiswand and other Alphacool products rely on this quick-release closure. This allows them to easily and quickly connect or disconnect the products.
The set is everything you need for the start. Hoses, the necessary fluid, a filling aid, Y-adapter for the fans and much more. The manual is very extensive with many pictures describing all parts in their function. With an Eissturm set you get the perfect set for your water cooling.
Radiator: NexXxoS ST30 Full Copper 360 mm
CPU: Eisblock XPX - Black
Pump: Alphacool Laing DDC 310
Fan: 3x Eiswind Pure Edition 120mm
- 8x Eiszapfen 13/10 mm straight
- 1x HF quick release G1 / 4
- 1000 ml Cape Kelvin Catcher
- 3 m hose PVC 13 / 10mm clear
- 1x filling aid - funnel
- 1x ATX bridging plug
- 1x Y-cable 4-pin PWM
- 1x Assembly instructions