+44 (0)1782 44 44 55
Aquainlet XT 150mlThe aquainlet XT has been designed to be directly mounted onto an aquastream XT or Eheim 1046 pumps.
The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity.
This is especially helpful when using rubber decouplers or a shoggy sandwich.
When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are particularly useful if the reservoir is to be installed with limited space.
The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part.
Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input.
The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED.
- Manufacturer: Aquacomputer
- Model Number: 34068
- Thread Size: G1/4"
- Compatibility: Aquacomputer Aquastream XT Pumps, Eheim 1046 Pump
- Overall Dimensions: 198mm x 58mm x 67mm
- Drive Bay Mountable: n/a
- Ports: 4
- Materials: Borosilicate Glass Tube, Acetal Caps
- Volume: 100ml (approx)
- Special Features: LED Window, Electronic Fill Level Sensor with USB & Aquabus Interface
- 1 x Aquacomputer Reservoir
- 2 x G1/4" Thread Blanking Plugs
- 1 x Pressure Equalisation Membrane
- 1 x Internal USB Connection Cable