Product information: Aquainlet XT 150ml with Nano CoatingThe aquainlet XT has been designed to be directly mounted onto an aquastream XT or Eheim 1046 pumps.
The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mo unting plate to be installed beneath the center of gravity.
This is especially helpful when using rubber decouplers or a shoggy sandwich.
When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing.
Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space.
The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion.
The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod.
- Material: Delrin, borosilicate glass
- Dimensions without pump: about 58 x 67 x 198 mm
- Thread: 4x 1/4 inch
- Filling volume: 150 ml
- Eheim 1046 pump and identical
- Two plugs G1 / 4 (pre-assembled)
- pressure equalization membrane (pre-assembled)
- internal USB connection cable