+44 (0)1782 44 44 55
Cuplex Kryos Delrin for 775 / 1155 / 1150 / 1156 / 1366 - G1/4"The development of kryos was the most expensive CPU coolers development in the history of Aqua Computer. Here you can see them from outside the Resulatat not too much, but every little detail in many variations has been simulated, fabricated and tested. This nearly 70 base plates and about 20 die plate types were produced for letztetendlich tests - all designed in the CAD variants are more together than 1000 There were also many test setups and tests. The test values were at the end a more than comprehensive figures. All this in order to get the last 1 / 10 K and to bring the cooler to where we wanted it: At the absolute world top.
For this he has been tested in our tests against all known competitors and there was only one goal here: to be better than the rest of the world. In our tests, we have achieved this, there are currently 15 cuplex kryos travel worldwide to prove at trial to this site too independent - we are anxious to stay in days.
The basic principle of the cooler is quite simple and similar to the back of strong cuplex pro. The water is injected centrally and then passes through a microstructure in the copper base, which in comparison to many Mitbwerbern of individual PINs and not made up of slots. This structure has it all: He cuplex kryos 1911 single copper pins. The structure size of the pins is 0,25 x0, 45mm and almost every pin is different in its geometry.
Stark was also revised the retention mechanism. This is now necessary for the kryos metal versions, their greater weight to use a version that makes it impossible to tighten the screws too much or to different degrees. By special thumbscrews there is now a defined stop. In addition, the top model with nickel-plated shell and a backplate including rubber insulation is included.
From cuplex kryos we offer three versions of:
The high performance version cuplex kryos XT is the version for those who want the last one to get 1 / 10 ° C. He has a nickel-plated shell, the new complex holder including backplate and thus offers a very attractive appearance and maximum performance.
The cuplex kryos PRO differs from that in pure brass shell and not executed in the delivery backplate. The performance is identical to the XT.
As an inexpensive entry-level version, there is the cuplex kryos Delrin. Here is the top part made of Delrin and the mounting system was taken over by cuplex XT Tues As a guide: The Kühlleitsung on an i7-960 is our test 0.3 - 0.5 ° C behind the other two versions. So you can still call one of the absolutely most powerful CPU Cooler his own, and this at a very reasonable price!
- Mounting kit (screws, springs, etc.)
- Prolimatech thermal compound PK-1, about 1 gram in foil packaging