Arctic Cooling
Arctic Accelero Xtreme Plus II VGA Cooler

  • The Accelero Xtreme PLUS II is here to satisfy overclockers with unmatched cooling performance while doing it in total silence.

Stock Code: HS-058-AR

EAN: 0872767004146

MPN: DCACO-V15G200-BL

Manufacturer: Arctic Cooling

 
 

Product information: Arctic Accelero Xtreme Plus II VGA Cooler

The Accelero Xtreme PLUS II is here to satisfy overclockers with unmatched cooling performance while doing it in total silence. Employing the award-winning design of the Accelero XTREME series, the Accelero Xtreme PLUS II comes with 300 Watts of cooling capacity, which gives plenty of headroom for overclocking. It is comprised of an 83-fin aluminum heatsink with 5 copper heatpipes to deliver superior cooling performance. Pre-applied with our flagship thermal compound MX-4, efficient heat dissipation of the components are guaranteed. The Accelero Xtreme PLUS II comes with the non-conductive G-1 thermal glue which is used to affix RAM and VR heatsinks on the VGA board. It is especially formulated to offer excellent thermal conductivity with long-lasting adhesiveness of over 10 years. Moreover, removing the G-1 is as easy as removing a thermal tape. With three PWM-controlled 92 mm fans, the Accelero Xtreme PLUS II cools efficiently and silently. Thanks to the PWM control, the fan spins according to the temperature of the GPU. This means that the fans just spin up if necessary and will rest at minimum speed otherwise. PWM settings can be modified to fix the priorities between performance and noise. Click here to see how PWM settings work. Aside from it being CrossFire and SLI compatible, the Accelero Xtreme PLUS II comes with a versatile and interchangeable mounting mechanism along with 31 RAM and VR heatsinks to fit different models. New accessory sets will be available to make the VGA cooler compatible with future models.

- Max. Cooling Capacity: 300 Watts
- Heatpipes: Ø 6 mm x 5
- Heatsink Material: Aluminum fins x 83, thickness 0.3 mm
- Fan (mm): 92 mm, 900 - 2,000 RPM (controlled by PWM) x 3 fans
- Bearing: Fluid Dynamic Bearing
- Noise Level: 0.5 Sone
- Dimensions (Product): 288 (L) x 103 (W) x 50 (H) mm
- Net Weight: 615 g
- Limited Warranty: 6 years

Compatible
AMD Radeon 7870 / 7850 / 6970 / 6950 / 6870 / 6850 / 6790 / 5870 / 5850 / 5830 / 4890 / 4870 / 4850 / 4830
Nvidia GTX 580 / 570 / 580Ti / 560 SE / 560 / 550Ti / 480 / 470 / 465 / 460SE / 285 / 280 / 275 / 260+ / 260
 

More links for "Arctic Accelero Xtreme Plus II VGA Cooler"

 
Arctic Cooling
 

Customer review "Arctic Accelero Xtreme Plus II VGA Cooler"

Average customer rating
Star Rating
(from 3 customer reviews)
 
Dave
I bought this cooler a few weeks back for my XFX R7850 and it works amazing well....
Jon
I bought these for my 2x 6950's, replacing their HIS ICEQ X coolers. Ease of setup 3...
Steve
This thing is brilliant. Got 2 for my 6950s. The recent hot weather made them really...
All Time (3)
67% (2)
33% (1)
0% (0)
0% (0)
0% (0)
 
Dave 2012-10-11

Arctic Accelero Xtreme Plus II VGA Coole

I bought this cooler a few weeks back for my XFX R7850 and it works amazing well.

My Idle temps before were 54c, with cooler their 28c. Before of full load 79c to 85c, with cooler their 48c and never go about 50c.

The best aftermarket cooler you'll ever buy. Very Happy

 
Jon 2012-08-13

Post purchase

I bought these for my 2x 6950's, replacing their HIS ICEQ X coolers.

Ease of setup 3 out of 5.
-1 Pre-applied thermal paste, 6950 chip is at a 45 degree angle.
-1 Thermal Epoxy was somewhat of a pain to work with & did not set in 5 hours.

Performance 5 out of 5.
6950 OC'd @ 900Mhz core & 1300Mhz mem

Idle temps down from 48 (stock) to 32
Load temps down from 58 (stock) to 45

Note: the Diamond IC paste i ended up using needs 24-48 hours to cure, so temps will be slightly lower after.

If only all performance cards came with this level of quality heatsink i would never have to swap.

Overall 4/5. But very happy with performance.

 
Steve 2012-06-16

Quality!

This thing is brilliant. Got 2 for my 6950s. The recent hot weather made them really really hot. Popped these on, idles at 33c and after 2 hours of bf3 they never went above 55C and thats just with CCC controlling fans. Iused thermal tape instead of glue on the heatsinks and they proceeded to fall off. Used glue and there rock soild. I really recommend this cooler.

 
 
Write a review
Reviews will be active after verification

 

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    BTO

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information
    Select Loan Product:
    For more information click here