+44 (0)1782 44 44 55
**B Grade** Enthoo Evolv Shift Mini-ITX Tempered Glass Case - Gunmetal Grey
B Grade items may have been used, have damaged packaging, missing accessories or a combination of these.
Some items may have scuff marks or slight scratches but should otherwise be an operable product.
The Enthoo Evolv Shift combines the striking design of the Evolv series with new, innovative features to make for a truly eye-catching Mini-ITX case. The Evolv shift has a very small footprint, nevertheless, thanks to its clever layout, it is capable of holding an extensive range of powerful gaming hardware. The shift can also be placed horizontally, cutting an attractive figure in any living room with its combination of aluminium and tempered glass.
The Features of the Phanteks Enthoo Evolv Shift Mini-ITX Case
- Striking aluminium and tempered-glass design
- Perfect case for stylish living room PCs
- Graphics cards up to 35 cm in length
- GPU bracket can be rotated
- Supports a wide range of RGB-LED controllers
- Can be set vertically or horizontally
Premium PC Case for the Living RoomThe Enthoo Evolv Shift offers space for gaming graphics cards up to 35 cm in length and, according to Phanteks, is ideally suited for the installation of AiO water-coolers. With its aluminium surfaces and tempered glass this Mini-ITX case fits seamlessly into any designer living environment and can be placed in a standing orientation, similar to Hi-Fi speakers, or placed horizontally like a games console.
The graphics card is mounted with the accompanying PCIe x16 riser card in such a way as to allow either the backplate or the GPU cooler to be visible from the exterior. The Mini-ITX motherboard is built in parallel to the graphics card with the back panel facing upwards. The ports on the I/O panel as well as the graphics card are hidden beneath a cover to allow all connected cables to be redirected through a gap in the back.
Cooling, Storage & Additional FeaturesA 140 mm fan comes pre-installed from the factory at motherboard height in the Evolv Shift and this helps to exhaust warm air out of the case from the front. Additionally the warm air produced by the hardware is also removed via the vents built into the roof of the case. A 120 mm fan or radiator for an All-in-One watercooler can be installed in the lower section, while a further 120mm fan/radiator can be installed in the front.
A 3,5" hard drive or a 2,5" SSD can be installed in the rear and two further SSDs can be located in the front using the SSD brackets - at the expense of the bottom 140 mm fans. The baseplate in the back, used for mounting the SSD/HDD, can also be removed to make hardware installation easier.
For the best view of the RGB-LEDs in the installed hardware the integrated LED lighting is compatible with Aura Sync from ASUS, RGB Fusion from Gigabyte as well as MSI's Mystic Light Sync, all of which can be controlled at the push of a button.
The I/O panel of the Mini-ITX case is located to the left side on the rear of the case and offers two USB 3.0 ports for gaming peripherals or external USB hard drives as well as USB sticks. In typical Phanteks fashion there are several points with Velcro ties as well as rubberised cable guides for cable management in the case design. As well as air vents in the aluminium on the front and rear, there are also dust filters in the casing to offer the system further protection.
- Dimensions: 170 x 470 x 274 mm (W x H x D)
- Material: Steel, aluminium, tempered glass
- Colour: Gunmetal Grey
- Form Factor: Mini-ITX
- Total Possible Fans:
2x 140/120 mm (front)
1x 140/120 mm (lower)
1× 140 mm (front)
- Radiator Mountings (partially dependent upon HDD and/or fan slots):
1x max. 120 mm (front)
1x max. 120 mm (lower)
- Filter: Front, back, lower (removable)
- Drive Trays:
1x 3,5" (internal, if no radiator is installed)
3x 2,5" (internal, 2 SSD brackets available, additional brackets can be acquired separately)
- Power Supply: 1x SFX or SFX-L (optional)
- Expansion Slots: 2
- I/O Panel:
2x USB 3.0
1x RGB Switch
- Maximum Graphics Card Length: 350 mm
- Maximum CPU Cooler Height: 82 mm
- Guarantee: 5 Years