Product information: **B Grade** Primo Chill Wet Bench Kit - Clear
B Grade items may have been used, have damaged packaging, missing accessories or a combination of these.
Some items may have scuff marks or slight scratches but should otherwise be an operable product.
With its slanted motherboard posture, the Wet Bench sets itself from the pack. Its simple but very practical approach to accessing the motherboard without interference from a door or secondary shelf. Wide open and ready to be tinkered with, was one of the core ideas that the bench was built around.
- Innovative slanted motherboard orientation
- Watercooling Ready!!
- Lightweight due to the PSU not being install on bench, but underneath
- Supports ATX, Micro ATX, Mini ITX, and E-ATX. Does not support HPTX at the moment.
- Simple and quick bench assembly
- Made in the USA, by Americans
- 1st screwsless all acrylic water cooling test bench
- 1st test bench with re-positional wire and water pass-thru covers
- 1st all acrylic test bench to natively support 3x120mm or 3x140mm radiators
- 1st test bench to have top removable MB tray for interchanging other benches
- 1st test bench to have screw-less GPU support system
- 1st test bench to offer over 30+ color combinations
- 1st test bench made by PrimoChill
- HDD/SSD/Optical thumbscrews for mount drives to bench
- Motherboard Quick Mount Hardware Kit
- 6x MB Tray covers and hardware to install
- 1x Drive Rack for vertical mounting 1/8 Inch Acrylic
- 2x Vandal Resistant Push Button Power/Reset Switches with harness
- 1x Universal Rad Mount for 3×120 and 3x140mm (15mm/16mm screw spacing)
- 1x Screw-less GPU Mount Grip
- Product Construction:
- Uprights and cross tray laser cut from 3/8 Inch cast acrylic
- Motherboard tray laser cut from 1/4 Inch cast acrylic
- Universal radiator support laser cut from 1/4 Inch cast acrylic
- Accessory covers laser cut from 1/4 Inch cast acrylic
- Product Dimensions:
- 12 Inches (30.48cm) – Tall
- 13.5 Inches (34.29cm) – Depth (front to back)
- 19.825 Inches (50.3555cm) – Wide