BitFenix
Top Sellers

BitFenix
Pandora ATX Midi Tower Case w/ Icon Programmable Display - Black

  • The BitFenix Pandora ATX brings all the sought-after elements from the original Pandora to full-size ATX systems.

 

7 In stock

£104.99
 
 
 

Stock Code: CA-224-BX

EAN: 4712883215063

MPN: BFC-PAN-600-KKWL1-RP

Manufacturer: BitFenix

 
 

Product information: Pandora ATX Midi Tower Case w/ Icon Programmable Display - Black

The BitFenix Pandora ATX brings all the sought-after elements from the original Pandora to full-size ATX systems. Key features are the 2.8” programmable BitFenix ICON™ LCD display in the front and support for 360mm radiators and graphics cards up to 440mm. Aesthetics have taken precedence during the design process, as the Pandora ATX retains its little brother’s uniquely curved exterior, while special care has also been taken to ensure the interior shows off your hardware at its best through the side window.

Setting the Pandora ATX apart is its unique curved panel design and the ICON display. Power and reset buttons are tastefully and non-intrusively backlit, while the side panel features an acrylic window. The Pandora ATX top panel starts with the front I/O, featuring dual USB 3.0 ports, dual audio jacks and dual USB 2.0 ports as well as power and reset buttons. The rest of Pandora ATX’s top cover consists entirely of a pop-off grille with a built-in dust filter.

The 2.8” ICON™ color display in the front of the Pandora ATX lets you customize your front panel with a simple drag-and-drop interface. Choose any picture or logo you want in the front! Interior-wise, the Pandora ATX is designed to not only accommodate your high-end hardware, but to show it off as tastefully as possible. Full ATX motherboards are now supported, and up to seven 2.5” SSDs can be installed, or five 2.5” units plus two 3.5” HDDs. The PSU is hidden away in the bottom, behind the power cover, allowing for stealthy cable management and clean builds. This is further supported by a 20mm clearance between the off-side door and the back of the motherboard tray and plentiful tie strap mounts.

The Pandora ATX is set apart from the Pandora Core not only by the use of its Icon™ display, but also a pre-installed 140mm fan, its reservoir bracket mounted to the top of the case as well as a pump mount at the bottom of the motherboard compartment. The Pandora ATX will comfortably house 360mm radiators, with one in the top or one in the front. For external watercooling needs, the case has rubber grommets above the rear exhaust fan for tube routing. Two easy-to-remove magnetically mounted dust filters are included with the Pandora ATX case –one for the three 120mm fans in the front, and one for the power supply, located in the bottom rear of the case.

Curved front panels are a unique feature of the Pandora ATX and so are their mounts. The leading edge is fixed with pushpins, and two insulating strips are installed to each panel. The trailing edge is fixed to the back of the case with thumb screws. The pump bracket is compatible with all existing pumps aimed at the PC market, while the SSD and HDD brackets are designed to be easy to install –with thumb screws.

Also included with all Pandora ATX cases is a foot to be installed separately to the rear, as well as a stylish aluminum front badge.

Specification

- Materials: Steel, ABS
- Supported Motherboards: ATX, Micro ATX, Mini-ITX
- 3.5" Drive Bays: 4
- 2.5" Drive Bays: 4
- Front/Top I/O: 2x USB 3.0, 2x USB 2.0, 1x 3.5mm Mic-in, 1x 3.5mm Line-out
- Cooling Front: 1x 140mm (Included), Max 3x 120mm OR 2x 140mm (Not Included)
- Cooling Rear: 1x 120mm (Included)
- Cooling Top: Max 3x 120mm OR 2x 140mm (Not Included)
- Expansion Slots: 7
- Highlights: BitFenix ICON™ Programmable Display, One piece power cover and MB tray, Top, Front and Bottom Dust Filters, 360mm Radiator Support, 20mm Cable Clearance, Graphics Card Length up to 440mm, Maximum PSU length up to 220 mm, CPU cooler height up to 160mm.
- Dimensions: 203 x 510 x 558mm
- Weight: 9.92kg (net), 11.4kg (gross)
 

More links for "Pandora ATX Midi Tower Case w/ Icon Programmable Display - Black"

 
BitFenix
 

OcUK TV

 

Video Thumbnail
Video Thumbnail

Technical Details

Case type Midi-Tower
Form factor ATX, Micro-ATX, Mini-ITX
Side panel Windowed
Colour Black
Main colour Black
Accent colour Black
Noise dampening No
Width (exact) 203
Height (exact) 558
Depth (exact) 510
Width 200 - 300 mm
Height 500 - 600 mm
Depth 500 - 600 mm
Material Plastic, Steel
Weight (exact) 9.92
Weight 8 - 10 kg
USB 4x
USB 3.0 2x
Audio output 1x
Audio input 1x
Internal 2.5" bays 4x
Internal 3.5" bays 4x
PCI slots 7x
Motherboard tray no
Remote no
Cable management yes
Front LCD/TFT display yes
Filter yes
Power supply no
Power supply format ATX
Power supply position Rear Lower
Fans pre-installed 1x 120mm, 1x 140mm
120mm Fan 7
140mm Fan 4
Fan colour Black
Fan controller no
Card reader no
Front door no
Hot-swap no
Position I/O Cover
HDD anti-vibration no
Radiator-mounting 1x Triple (360mm)
Lighting no

Customer review "Bitfenix Pandora ATX Midi Tower Case w/ Icon Programmable Display - Black"

Average customer rating
Star Rating
(from 2 customer reviews)
 
Thomas
This is a very nice looking case that can display the internals in your machine very...
steven
this is a superb case for any enthusiast, it's very easy to build in and very spacious...
All Time (2)
100% (2)
0% (0)
0% (0)
0% (0)
0% (0)
 
Thomas 2016-01-10

Very stylish case but watch your cooling

This is a very nice looking case that can display the internals in your machine very well. Its spacious on the inside due to no front bays or hdd bay(it uses a clever hdd mounting system to either display or hide your drives away) and just looks awesome, the front screen is a nice touch which i have used to display my machines name(Dreadhowl) accompanied with a picture of a wolf.

As said in the title watch your cooling, The case came with 2 fans and I wanted to match my old case with 5 but my motherboard only supports 4 extra, so I needed a fan controller(want to keep noise to a minimum) but this case does not have front bays so I was limited to one fan controller which is quite expensive(nzxt lxe), I have also had to size down my cpu cooler as it bends the case's side panel out(I have a massive deepcool Lucifer cooler).

Construction seems sturdy so I am Overall very Happy with it.

 
steven 2015-12-31

superb case

this is a superb case for any enthusiast, it's very easy to build in and very spacious for a atx case, i've gone for thus case so in the future i can venture into watercooling and make a custom loop, cable routing is the easiest i've ever dealt with, the icon is a nice touch and really easy to change image's, there's only one con and that is the push tabs, i have simply used magnets instead as they can pop off especially when my cats rub agen them when they want me to stop gaming and feed them, this is a really well thought out case and for a budget case it's right up there with the best

 
 
Write a review
Reviews will be active after verification

 

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    BTO

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information
    Select Loan Product:
    For more information click here