BitFenix
Top Sellers
 
 

BitFenix
Spectre PRO 200mm Red LED - Black

  • Following the success of our Spectre™ LED Fan Series. The Spectre Pro™ LED ups the ante with an all-new design and enhanced performance.

 

2 In stock

£13.99
 
 
 

Stock Code: FG-021-BX

EAN: 4716779447545

MPN: BFF-LPRO-20025R-RP

Manufacturer: BitFenix

 
 

Product information: Spectre PRO 200mm Red LED - Black

Following the success of our Spectre™ LED Fan Series, Spectre Pro™ LED ups the ante with an all-new design and enhanced performance. The high pressure and CFM design produces wicked cooling and is also perfect for watercooling setups. Its dual frame construction not only looks great, but also helps to dampen vibrations that cause unnecessary noise. Reinforced fan blades prevent warping at high RPM levels, while focused airflow ensures cool air can reach all of your installed components. With FDB technology for low noise and long life, multiple color options, and on-the-fly light switching, Spectre Pro LED is the new gold standard in performance case fans.

- Dimensions (mm): 200x200x25mm
- Current (A): 0.33A ±10% Speed (RPM): 900 RPM ±10%
- Air Flow (CFM): 148.72 CFM ±10%
- Air Pressure (mmH2O): 1.26 mmH2O
- Noise (dB-A): 27.5 dB(A)
 

More links for "Spectre PRO 200mm Red LED - Black"

 
BitFenix
 

Customer review "BitFenix Spectre PRO 200mm Red LED - Black"

Average customer rating
Star Rating
(from 7 customer reviews)
 
Pappa71D
I've been looking for a replacement intake fan for my 600T for a while, owing to the...
Anthony
I have installed 3 of these into my HAFX Case and they are fantastic at removing hot...
Brought this to replace the stock 200m fan in my Corsair 650D. With the drive bays...
All Time (7)
86% (6)
0% (0)
14% (1)
0% (0)
0% (0)
 
Pappa71D 2016-06-01

Great intake replacement for Corsair 600T

I've been looking for a replacement intake fan for my 600T for a while, owing to the well renowned "clicking" of the stock Corsair 200mm fan.

Having done a bit of research, I finally took the plunge with this Bitfenix offering.

I'm really glad I did. Fitting was a doddle (once I'd moved the HDD cage back) and my case now runs beautifully quiet - no ticking!!!!!

The only reason I didn't give a 10 is that there are no instructions at all...its not hard to work out if youre used to building rigs, but even a small "quick start" guide in the supplied fitting options/cables would have been nice.

Summary - brilliant aftermarket solution with the added bonus that I now have a red LED fan to match my ROG motherboard lighting...

 
Anthony 2016-04-20

Very Quiet with Good Air Flow

I have installed 3 of these into my HAFX Case and they are fantastic at removing hot air from my system.

Highly recommended.

 
2014-02-07

Excellent 200mm fan

Brought this to replace the stock 200m fan in my Corsair 650D.
With the drive bays still in place, it is a snug fit, but it does with a little effort.

I have however moved my drive bay into the spare 5.25 drive bays so the graphic card get the full effect of the fan.

The glow from the fan can be see through the front of the case, & does illuminate the inside of the case a little.
Airflow is very good, & fan isn't to noisy, although I run it 50% & it's pretty quiet as that speed.

 
2013-10-22

Quiet, very good airflow

based on others recommendations i swapped my 600t's front 200mm for this and WOW what a difference, so much more airflow, so much more silent. Looks great, nice lighting on the LED's and fit perfectly without any modification needed at all.

Not much else to say, Controlling from a Lamptron FC6 with NO clicking sound you can get from larger fans with a fan controller.

 
Steve 2012-08-12

Won't fit Storm Enforcer

Bought this to go in the top of my Storm Enforcer case but due to it's additional screw holes around the corners it doesn't fit in the top of the case.

 
Darren Simmons 2012-08-08

WOW!!

I have 2 gtx 480's running in a heavily over-clocked i7 902 rig. I cut a blow hole in the side and mounted this fan on intake and it took an amazing20 degrees off of my cards! It enabled me to overclock my 480's almost up to 580's speeds and keep them both well under 75 degrees load. Vey happy!

 
Erik 2012-04-06

Great case fan

Replaced my Corsair 200mm fan with this fan in a Corsair 650D case. Fan is easy to install and includes screws, rubber grommets, 7V adaptor, 3pin-molex adaptor and a separate 2pin extension for use with bitfenix cases. Fan is very quiet (quieter than the standard Corsair) and the included 7V adaptor is great. Fan looks great and reduced case temps by around 2 degrees.

 
 
Write a review
Reviews will be active after verification

 

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    BTO

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information
    Select Loan Product:
    For more information click here