Corsair
Hydro H55 Quiet Liquid CPU Cooler

  • Socket Compatibility: 775 / 1150 / 1155 / 1156 / 1151 / 1366 / 2011/ AM2 / AM2+ / AM3 / FM1 / FM2

 

20+ In stock

Was: £69.95
£63.95
 
 
 

Stock Code: HS-013-CS

EAN: 0843591034470

MPN: CW-9060010-WW

Manufacturer: Corsair

 
 

Product information: Hydro H55 Quiet Liquid CPU Cooler

The Easy CPU Performance Upgrade
Your PC will run cooler and quieter when you replace your CPU’s standard heatsink with a Hydro Series H55.

Installation is straightforward: if you can get to the back of your PC’s motherboard, you can install an H55. All you’ll need is a screwdriver.

Great for Smaller Cases
The compact components and flexible tubing make Hydro Series H55 easy to install even if you’re cramped for space. It allows you to improve your CPU’s cooling efficiency even in most compact cases — as long as your case has a 120mm fan mount near the CPU, H55 will probably fit.


Self-contained cooling system
Hydro Series H55 comes pre-filled, and never needs refilling or priming.

Tool-free mounting bracket kit
The modular design makes installation simpler, and it’s compatible with Intel and AMD processors.

Low-noise, low-speed 120mm fan
The low speed and wide diameter reduces noise levels over the smaller, faster fans used on stock CPU coolers. The three-pin connector is compatible with fan controllers.

Low permeability rubber tooling
Minimal coolant evaporation helps ensure long life, and the resilient rubber offers both high flexibility and excellent leak protection.


Low-profile pump
The pump unit provides high-speed circulation without taking a lot of space. This makes installation easier, and helps improve your case’s airflow.

Latest generation micro-fin copper cold plate with pre-applied thermal compound
Copper has excellent thermal transfer characteristics, and the fin design is optimized for efficient heat exchange.

Low-profile black aluminum heat exchanger
The low-profile design reduces the airflow requirement, which helps make H55 quieter. The small size also allows for easier installation and improved compatibility, and the black finish looks great.

Package contents

Corsair H55 Liquid CPU Cooler
One 120mm fans
Mounting screws for fan and radiator
Mounting brackets for Intel™ LGA 115x/1136/2011 and AMD AM2/AM3
Quick Start Guide
Technical Specifications

Radiator dimensions: 120mm x 152mm x 27mm
Fan dimensions: 120mm x 120mm x 25mm
Fan speed: 1700RPM +/- 10%
Fan airflow: 57 CFM
Fan dBA: 30.32 dBA
Fan static pressure: 1.9mm/H20
Compatibility

Intel LGA 1155, 1156, 1366, and 2011
AMD sockets AM2, AM3 and FM1
 

More links for "Hydro H55 Quiet Liquid CPU Cooler"

 
Corsair
 

Customer review "Corsair Hydro H55 Quiet Liquid CPU Cooler"

Average customer rating
Star Rating
(from 6 customer reviews)
 
This cooler is simple to install and a solid performer. Had no issues installing on a...
its a fantastic little cooler, part of my first build. CPU - Intel Core i5-4690K...
Works well with the Kraken G10, kept my R9 290 and is now keeping my R9 290X cooled,...
All Time (6)
83% (5)
0% (0)
0% (0)
0% (0)
17% (1)
 
2015-07-03

Simple and solid

This cooler is simple to install and a solid performer.
Had no issues installing on a 1150 socket, the guide is simple but clear enough.
The included fan runs really quietly that at first I wasn't sure it was working!
Overall I heartily recommend.

 
2015-04-05

Didn't fit properly..

I've previously used the hydro H50 and loved it as it did everything i wanted it to do..However this did not..The plastic back bracket didn't fit properly as i had to twist it to fit, only to find out the cpu bracket didn't even match the rear bracket by about half a cm on all connection points. Although it says it was compatible with my 1150 socket it was not..Had to return it.

 
2015-03-24

cool - beautifull

its a fantastic little cooler, part of my first build.

CPU - Intel Core i5-4690K 3.50GHz (Devil's Canyon)
MOBO - MSI Z97 Gaming 5 Intel Z97 ATX.
case - Silver stone Fortress 3.0

(i was really worried that the radiator block wouldn't fit into the small 120 fan space in the Silver stone fortress,
but it fitted with room to spare, so very happy with that)

Product:-
the actual cooler was well build, a small amount of sealant around the hose connection but didn't cause a problem and there were/are no leaks.
keeping my CPU well below 30c
runs very quiet
came with thermal past already applied

Installation:-
for my first build this was a nervous process,
i wasn't sure if i should instal the radiator to the case, or the CPU mount on the motherboard first.
the instructions were a little vague, but it really is quite a straight forward process.

I installed the back plate on the motherboard first then assembled the CPU mount, and attached the cooler to it.

I then installed the mobo and the radiator block into the case.

then i placed the CPU mount over the CPU and screwed the mounting pins straight into the mobo/back plate sockets. and tightened till moderate resistance (Not too hard!)

thankfully this worked well and my CPU is running perfectly, and without fault.

*i changed the fan to a LED lit 120, not the stock corsair fan (With is actually better) and still keeping my CPU below 30c (about 26-27c)






 
2014-11-02

R9 290/290X

Works well with the Kraken G10, kept my R9 290 and is now keeping my R9 290X cooled, 60c at stock, upto 70c when overclocking 1221/1600. Single SP 120 corsiar fan.

 
2014-07-20

Excellent cooling option

Excellent option put one in my new build with an i5 4690k devils canyon and its keeping it well below 30c all the time. Very impressed.

 
2013-08-10

cheap n cheerful

hi, don't be put off by the tiny pricetag. this little cooler is fantastic, beat my previous 1 by 10 degrees. 30 C at idle on a i7 3770. nuff said.

 
 
Write a review
Reviews will be active after verification

 

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    BTO

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information
    Select Loan Product:
    For more information click here