+44 (0)1782 44 44 55
A80 All in One Liquid CPU Cooler - 280mmAll-in-one water cooling systems are extremely popular because, on the one hand, their cooling performance is significantly higher than that of air coolers, but on the other hand the installation effort is almost as low thanks to pre-assembly and filled delivery - in any case, however, it is considerably lower than that of a custom-assembled traditional water cooling system. With the All-in-One A80 Cryorig has introduced their own processor water cooling setup.
Cryorig's A80 at a Glance:
- Compact All-in-One water cooling for CPUs
- 280 mm radiator with 2x 140 mm fans
- Additional fan for cooling the CPU environment
- Copper heat sink for efficient heat dissipation
- Compatible with current Intel and AMD sockets
- Manufacturer's warranty up to 6 years
Additional Fan Cools CPU SocketThe special feature of the Cryorig A80: An additional fan on the CPU heat sink cools the space around the processor, which is otherwise allowed to collect heat by conventional CPU fans. The direction of the additional fan is variable and can be directed specifically to additional hotspots, such as RAM, graphics card or voltage regulators.
However, all compact heating/cooling systems are based on the same basic design: they consist of two parts - the radiator and the heat sink. While the radiator of the A80 from Cryorig is mounted on two 140 mm fan slots - preferably on the top of the case - the cooler is mounted on the CPU. The pump is already installed in the cooler housing. Since it is a closed loop, the system does not need to be serviced. Cryorig uses the popular fifth-gen Asetek technology.
Fine Fan Structure Dissipates HeatThe heat sink's large contact area absorbs the processor's waste heat and, thanks to copper, transfers it efficiently to the water. This is pumped towards the radiator, where the coolant flows through a series of delicate fins - and these transfer the heat to the air flowing through it. Cryorig uses its own high-performance fans, the low-noise and efficient QF140 performance fans. The speeds of all fans can be controlled and adjusted by PWM on the basis of the CPU temperature.
An essential adbantage in comparison to CPU air coolers with All-in-One designs is the increased flexibility in terms of how the available space is used. Tower coolers cannot usually be used in compact housings due to lack of space. In the case of the Cryorig A80, however, only the flat cooler has to sit directly on the CPU. The improved hose structure, where the hoses are directed upwards rather than sideways, makes it easier to fit them in the case.
Fits Modern AMD- and Intel PlatformsThe radiator is, due to its size, more challenging to fit than the smaller models. For this reason the it must be established beforehand if the case used offers two 140 mm fan mounting slots both immediately next to each other as well as offering sufficient height clearance. The AiO cooling system is designed for all current AMD- and Intel platforms, and the corresponding mounting systems are included.
Those who register their product with Cryorig can extend their manufacturer's guarantee from three to six years.
Radiator: 272 x 120 x 27.5 mm (L x W x D)
Pump (without fan): 88 x 88 x 52.9 mm (L x W x D)
Pump (with fan): 88 x 88 x 116.2 mm (L x W x D)
- Materials: Aluminium, copper, plastic, rubber, nylon
- Pump Speed: 1.000 - 2.800 RPM +/- 300 RPM
- Voltage (pump): 12 V
- Connection (pump): SATA plug
- Hose Fength: 35 cm
- Fan (Radiator):
Type: 2x 140 mm (QF140 Performance)
Speed: 600 - 1,850 RPM
Airflow Volume: Up to 217.5 m3/h
Static Pressure: Up to 2,12 mm H2O
Volume: 13 - 38 dB (A)
Connection: 4-pin PWM
- Fan (pump):
Type: 1x 70 x 70 x 25,4 mm
Speed: 1,500 - 3,000 RPM
Flow Volume: Up to 43 m3/h
Static Pressure: Up to 3.1 mm H2O
Volume: 15 - 27 dB (A)
Connection: 4-pin PWM
Intel Sockets: 1150,1151,1155,1156,1156,1366,2011 (-V3)
AMD Sockets: FM1, FM2 (+), AM2 (+), AM2 (+), AM3 (+), AM4 (with extension kit)
- Manufacturer's Warranty: up to 6 years
More links for "A80 All in One Liquid CPU Cooler - 280mm"
1150, 1151, 1155, 2011, 2011-V3, AM3+, FM2+, AM2+
CPU Cooler type
AIO Water cooling
4Pin (PWM control)