+44 (0)1782 44 44 55
R1 Ultimate Dual Tower CPU Heatsink with 2x 140mm Fan - BlackCryorig, a relatively young company, quickly became famous for its efficient and innovative products in the field of CPU cooling. The team of experienced radiator and OC experts rely on high-quality materials and innovative combinations of individual components to get the most out of air coolers. At the same time, Cryorig attaches great importance to keeping the installation of its CPU coolers as simple as possible. The coolers from Cryorig like this Dual Tower CPU Vooler R1 Ultimate also offer an impressive aesthetic.
Cryorigs R1 Ultimate at a Glance:
- Dual tower CPU coolers in copper and aluminium for best cooling performance
- Specially arranged cooling fins ensure optimum removal of residual heat
- Suitable for processors with up to 250 Watt TDP
- Height: 168.3 mm
- Compatible with all common AMD and Intel sockets
- Uncomplicated installation
Optimised Airflow Output of the R1 UltimateIn the R1 Ultimate dual-tower CPU cooler, Cryorig installs seven 6mm thick heatpipes that connect the nickel-plated copper base plate to the two towers of the heat sink. The special feature, however, is the design of the blades of the twin-tower CPU cooler. The cooling fins in the front area have a distance of 2.4 mm, while the cooling fins in the rear area have a distance of only 1.8 mm. These different distances ensure an optimized outflow of air thanks to compression. Cryorig calls it the Jet Fin Acceleration System. This enables the heated air to be dissipated more efficiently from the dual tower cooler.
Both cooling towers of the finned coolers as well as the heatpipes in between are welded together using a special soldering process to allow ten percent more surface contact. The heatpipes are also arranged in an offset orientation between the two finsm which also ensures optimum heat distribution.
Easy and Quick InstallationAs an effective anti-vibration measure, four rubber dampeners are embedded in each of the two XF140 fans at the corners. This dampens the vibration of the fans to the fins. Cryorig's XF140 fans have extraordinarily quiet bearings, and this ensures that the noise level of the entire cooler remains low at 41 dB. Thanks to its outstanding performance and efficiency, the twin-tower cooler is suitable for processors with 250 watts TDP (Thermal Design Power) .
The extremely easy assembly is particularly ingenious. The backplate is fixed by hand with knurled screws. This is followed by the frame for the CPU in question, which is also fastened with knurled screws. The heat sink is then attached with the enclosed screwdriver. Thermal conductive paste and a cleaning cloth for removing residues are included in the bundle. Mounting clips for an optional third fan are also included.
Registering your product with Cryorig allows you to extend the manufacturer's warranty from three to six years.
- Dimensions: 140 x 168,3 x 142,4 mm (W x H x D)
Without Fan: 970 g
With Fan: 1.282 g
- Material: Nickel-plated copper (base, heatpipes), coated aluminium (fins)
- Colour: Silver, black
- Heatpipes: 7x 6 mm
- TDP: 250 W +
- Fans: 2x 140 mm XF140
RPM: 700 to 1.300 RPM
Volume: 23 dB (A)
Flow Volume: max. 152 m3/h
Static Pressure: max. 1.44 mm H2O
Intel sockets 775,1150,1151,1155,1156,1366,1366,2011,2011-V3
AMD sockets FM1, FM2, FM2+, AM2, AM2+, AM3, AM3+, AM4 (bracket needed)
Maximum RAM height: 30 to 35 mm .
- Manufacturer's Warranty: Up to 6 years
More links for "R1 Ultimate Dual Tower CPU Heatsink with 2x 140mm Fan - Black"
This article is used in:
1150, 1151, 1155, 2011, 2011-V3, AM3+, FM2+, AM2+, AM4, 2066
CPU Cooler type
4Pin (PWM control)