+44 (0)1782 44 44 55
EK Water Block EK-Supremacy AMD Classic RGB - Nickel + Plexi inc. 4 FREE EK-HTC Classic 10/16mm - Bl
CPU Water Block
EK-Supremacy Classic RGB is a high-end water block CPU water block for modern AMD processors. It features a simple, minimalistic design while maintaining the class-leading performance. The water block comes with a pre-installed 4-pin 12V RGB LED strip.
The EK-Supremacy Classic RGB AMD water block uses a simplified revision of the award-winning EK-Supremacy CPU water block cooling engine, further tweaked for performance and optimal coolant flow! Low hydraulic flow restriction enables this product to be used in setups using weaker water pumps or lower pump speeds for added silent operation, while still achieving top performance! The water block also comes with a simple, straightforward RGB lightning implementation which connects to a standard 4-pin 12V RGB header.
The top of the block is made from CNC machined high-grade acrylic glass. Every EK-Supremacy Classic water block comes with a precisely machined copper base (sometimes referred to as ‘cold plate’) which is made from purest copper available on the market and is treated with nickel electroplating.
This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. You can easily remove the LED strip cover which is mounted with two screws to replace the LED strip with some other type LED strip.
- RGB cable length: 30cm
- RGB connector classic 4-pin (12+ R G B)
CPU socket compatibility:
- AMD AM4
FREE 10/16mm Fittings
This product is a part of the EK® Classic Product Line that is characterized by minimalistic and clean design while maintaining class-leading performance. Less talk, more cooling!
EK-STC Classic 10/16 (Soft Tubing Compression) Fittings are 10/13 soft-tube compression fittings designed for use with flexible soft tubing. With a high-quality finish, the EK-STC Classic Fittings are an aesthetically appealing and secure option for your custom loop liquid cooling system. A non-intrusive, minimalistic look, with NO added branding at all.
The locking ring is compressing the tubing wall underneath the ring, and this prevents the flexible tube from being pulled off the barb of the fitting. EK-STC Classic fittings are available in the three most popular color options such as nickel, black and black nickel.
The barb and the ring are made of CNC machined brass and the seal is made quality rubber O-rings.
The fitting barb surface is smooth and has no adequate gripping surface, but the inside of the bard is socketed with an 8mm hex Allen key pattern. It's highly recommended to use an Allen Key 8mm (purchased separately) to prevent skin damage to the fingertips while installing the fitting. Please, be advised not to use excessive force when attaching fitting barbs using Allen Key 8mm in order to prevent damage to other liquid cooling products!
These fittings have guaranteed compatible with all other EK Water Blocks liquid cooling products.
- Thread: G1/4" BSP; 4.5mm male thread length
- Supported tube: 10 / 16mm ID / OD - (3/8" / 5/8" ID / OD)
- Outer diameter of a fitting: 22mm
- Installed height: 15.6mm
- Compatible tubing: PVC, EPDM, Norprene, silicone, most types of flexible tube