+44 (0)1782 44 44 55
EK Water Block EK-Supremacy Classic RGB - Nickel + Plexi inc. 4 FREE EK-HTC Classic 16mm - Black
CPU Water Block
EK-Supremacy Classic RGB is a high-end, quality CPU water block for modern Intel processors. It features a classic, market-proven design that will perfectly fit the needs of core enthusiasts and demanding users as well!
The EK-Supremacy Classic RGB water block uses a simplified revision of the award-winning EK-Supremacy CPU water block cooling engine, further tweaked for performance and optimal coolant flow! Low hydraulic flow restriction enables this product to be used in setups using weaker water pumps or lower pump speeds for added silent operation, while still achieving top performance! The water block also comes with a simple, straightforward RGB lightning implementation which connects to a standard 4-pin 12V RGB header.
The top of the block is made from CNC machined high-grade acrylic glass. Every EK-Supremacy Classic water block comes with a precisely machined copper base (sometimes referred to as ‘cold plate’) which is made from purest copper available on the market and is treated with nickel electroplating.
This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. You can easily remove the LED strip cover which is mounted with two screws to replace the LED strip with some other type LED strip.
- RGB cable length: 30cm
- RGB connector classic 4-pin (12+ R G B)
CPU socket compatibility:
- Intel LGA-1150/1151/1155/1156
- Intel LGA-2011(-3)
- Intel LGA-2066
FREE 14mm Fitting
This product is a part of the EK® Classic Product Line that is characterized by minimalistic and clean design while maintaining class-leading performance. Less talk, more cooling!
EK-HTC Classic 16 (Hard Tubing Compression) Fittings are 16mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a high-quality finish, the EK-HTC Classic Fittings are an aesthetically appealing and secure option for your custom loop liquid cooling system. A non-intrusive, minimalistic look, with NO added branding at all.
The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. EK-HTC Classic fittings are available in the three most popular color options such as nickel, black and black nickel.
The barb and the ring are made of CNC machined brass and the seal is made quality rubber O-rings.
The base fitting surface is smooth and has no adequate gripping surface, but the inside of the bard is socketed with a 9mm hex Allen key pattern. It's highly recommended to use an Allen Key 9mm (purchased separately) to prevent skin damage to the fingertips while installing the fitting. Please, be advised not to use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent damage to other liquid cooling products!
These fittings have guaranteed compatible with all other EK Water Blocks liquid cooling products.
- Thread: G1/4" BSP; 4.5mm male thread length
- Supported tube: 16mm OD
- Outer diameter of a fitting: 23.8mm
- Installed height: 13mm
- Compatible solid tubing: Acrylic, PETG, Copper, Brass, Stainless Steel