EK Water Blocks
EK-D5 Vario X-TOP Incl. Pump - Plexi
- EK-D5 Vario X-TOP is a High-Performance water cooling pump. This unit offers increased hydraulic performance (up to 15 %) compared to original Laing D5 Vario.
Stock Code: WC-453-EK
EAN: 3831109842768
MPN: 3831109842768
Manufacturer: EK Water Blocks
Supported by the biggest tech community forums.overclockers.co.uk
+44 (0)1782 44 44 55
Product information:
This water pump features three G1/4 threaded ports which allow installation of virtually any G1/4 thread fitting / barb. EK recommends EK-CSQ series compression fittings. Additional outlet port allows easier tube routing possibilities.
Top is made of quality Acrylic material. Mounting mechanism and easy-to-follow installation guide are enclosed.
This pump is ideal for PC and other electronics water cooling. The D5 pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. Rated 50.000 hrs MTBF at 25°C ambient!
Adjustable speed in five steps:
Step 1: 1800 rpm
Step 2: 2550 rpm
Step 3: 3300 rpm
Step 4: 4050 rpm
Step 5: 4800 rpm
Technical specifications:
Motor: Electronically commuted spherical motor
Rated voltage: 12V DC
Power consumption: 23W
Permitted voltage range: 8-24V DC
Maximum pressure head: up to 3.9m
Maximum flow: up to 1500L/h
Maximum liquid temperature: 60°C
Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
Power connector: 4-Pin Molex- and 3-Pin FAN connector
Made in Slovenia - EU!
Pump motor made in Hungary - EU!
EK-D5 Vario X-TOP Incl. Pump - Plexi
EK-D5 Vario X-TOP is a High-Performance water cooling pump. The core of the unit is the market-proven Laing D5 Vario water pump (incl. tacho signal 3-pin header) and comes pre-assembled with Clean CSQ variant of EK-D5 X-TOP. This unit offers increased hydraulic performance (up to 15 %) compared to original Laing D5 Vario.This water pump features three G1/4 threaded ports which allow installation of virtually any G1/4 thread fitting / barb. EK recommends EK-CSQ series compression fittings. Additional outlet port allows easier tube routing possibilities.
Top is made of quality Acrylic material. Mounting mechanism and easy-to-follow installation guide are enclosed.
This pump is ideal for PC and other electronics water cooling. The D5 pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. Rated 50.000 hrs MTBF at 25°C ambient!
Adjustable speed in five steps:
Step 1: 1800 rpm
Step 2: 2550 rpm
Step 3: 3300 rpm
Step 4: 4050 rpm
Step 5: 4800 rpm
Technical specifications:
Motor: Electronically commuted spherical motor
Rated voltage: 12V DC
Power consumption: 23W
Permitted voltage range: 8-24V DC
Maximum pressure head: up to 3.9m
Maximum flow: up to 1500L/h
Maximum liquid temperature: 60°C
Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
Power connector: 4-Pin Molex- and 3-Pin FAN connector
Made in Slovenia - EU!
Pump motor made in Hungary - EU!
More links for "EK-D5 Vario X-TOP Incl. Pump - Plexi"
Recently Viewed
Customer review
No Review Yet
This is your chance!
Be the first to review this product
Write a review