+44 (0)1782 44 44 55
EK-Vector RTX 2080 RGB Founders Edition Water Block - Nickel + Plexi
The EK-Vector high-performance water block is specially designed for multiple NVIDIA® GeForce® RTX Turing based graphics cards. The water block itself uses the signature EK® single slot slim look, and it covers the entire PCB length. This sophisticated cooling solution will transform your beefy graphics card into a minimalistic, elegant piece of hardware. The block also features a unique aesthetic cover over the block Terminal which is designed to reveal the graphics card model, visible from the side.
The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks.
The EK® Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.
The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality black POM Acetal. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. The front aesthetic corner piece is lit up with LED strip and can be easily removed to replace the LED strip with your preferred solution. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header.
EK® recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section.
G1/4" threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of GPU Terminals.
The NVIDIA® NVLink is compatible with this water block.
- EK-Vector series high-performance water block
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts, and washers
- 2x Nickel plated brass plug G1/4”
- 6mm Allen key
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)
- Due to an immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
- NVIDIA® RTX 2080 Founders edition factory backplate is not compatible with this water block!
- This product should NOT be installed with any aluminum Fluid Gaming parts!
- EVGA GeForce RTX 2080 XC Gaming, 8GB GDDR6 (08G-P4-2182-KR)
- EVGA GeForce RTX 2080 XC Ultra Gaming, 8GB GDDR6 (08G-P4-2183-KR)
- MSI GeForce RTX 2070 Aero 8G, 8GB GDDR6, (V373-002R)
- Nvidia PCB Design NVIDIA GeForce RTX 2080 Founders Edition, 8GB GDDR6
- Palit GeForce RTX 2080 GamingPro OC, 8GB GDDR6 (NE62080S20P2-180A)
- Palit GeForce RTX 2080 GamingPro, 8GB GDDR6 (NE62080020P2-180A)
- Zotac GAMING GeForce RTX 2080 AMP! Edition, 8192 MB GDDR6 (ZT-T20800D-10P)
More links for "EK-Vector RTX 2080 RGB Founders Edition Water Block - Nickel + Plexi"
Graphics Card Edition
EK Water Blocks