EK Water Blocks
Thermal PAD E 2,0mm - (RAM 8X)
- Replacement Type E (50 x 25 x 2.0 mm) thermal conductive pad for use with EK water blocks.
3 In stock
£2.39 *
Stock Code: WC-918-EK
EAN: 3830046996718
MPN: 3830046996718
Manufacturer: EK Water Blocks
Supported by the biggest tech community forums.overclockers.co.uk
+44 (0)1782 44 44 55
Product information:
Thermal pads are used to fill air gaps caused by imperfectly flat or smooth surfaces which should be in thermal contact. Please consult your installation manual prior purchasing to see what size and thickness is correct for your EK water block.
Thermal conductivity: 3.5 W/mK (+/-0.35)
General dimensions: Type E (50 x 25 mm) - precut to 8 pieces
Thickness: 2.0mm
Working Temperature: -55 ~ +200°C
Hardness: 5 (Shore A)
Elongation: 100%
Specific Gravity: 2.6 g/cm3 (+/- 0.2)
Flame Rating: V-0
Dielectric Breakdown Voltage: >4kV
Volume Resistance: > 10^11 Ohm-m
Main ingredient: Aluminum oxide (Al2O3) 85-95%
Thermal PAD E 2,0mm - (RAM 8X)
Replacement thermal conductive pad for use with EK water blocks. Along with thermal conductivity, it provides great elasticity and elongation with natural tack on one side. Can be used multiple times, thus offering great reworkability and electrical insulation.Thermal pads are used to fill air gaps caused by imperfectly flat or smooth surfaces which should be in thermal contact. Please consult your installation manual prior purchasing to see what size and thickness is correct for your EK water block.
Thermal conductivity: 3.5 W/mK (+/-0.35)
General dimensions: Type E (50 x 25 mm) - precut to 8 pieces
Thickness: 2.0mm
Working Temperature: -55 ~ +200°C
Hardness: 5 (Shore A)
Elongation: 100%
Specific Gravity: 2.6 g/cm3 (+/- 0.2)
Flame Rating: V-0
Dielectric Breakdown Voltage: >4kV
Volume Resistance: > 10^11 Ohm-m
Main ingredient: Aluminum oxide (Al2O3) 85-95%
More links for "Thermal PAD E 2,0mm - (RAM 8X)"
Recently Viewed
Customer review
No Review Yet
This is your chance!
Be the first to review this product
Write a review