overclocking a rev B2 e6300 on a ds4. need some help.

Associate
Joined
16 Nov 2005
Posts
759
Location
Newry, Northern ireland
hey guys, its been a while since ive haunted this place, but i'm currently clueless as to solve this problem:

ok so i have a revision B2 e6300 sitting happily on 2.8ghz stable for the past couple of months. this is on a p965-ds4 along with a 2gb set of geil pc2-6400 rated at 4-4-4-12. i'm gettin 2.8ghz via a fsb of 450 x7 and using a memory multiplier of two. i'm trying to go higher, but there are no lower memory multipliers available in the bios. if i raise the fsb by 20mhz the pc refuses to boot up. is this the brick wall of my motherboard or is there any way i can get past this? woul relaxing mem timings and bumping voltage help? i also notice even though this set is meant to work at 4-4-4-12, cpu-z is reporting the SPD contains 5-5-5-18 at 400mhz on the timings table although the part number says its CL4-4-4DDR2-800. i can't see anywhere to change the memory timings in the bios strangely enough. any help is much appreciated.
 
Soldato
Joined
23 Apr 2004
Posts
3,582
Location
UK, Near the middle......
Back
Top Bottom