• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Q6600 got to 3.4ghz with 1.35v, whats the average voltage for these chips?

Associate
Joined
25 Jan 2008
Posts
24
Im a happy man to get this far at 3.4ghz, not one single crash or fail boot yet.

Was just wondering what the average voltage was for clocking these, im feeling prety lucky so far at just 1.35v.
 
Associate
OP
Joined
25 Jan 2008
Posts
24
THat temperature seems a bit optimistic, check with Coretemp as well

Naud

Abit Guru shows 28c Coretempp shows 38c, speedfan shows 25c and bios shows 29c.


psychas is that clock for 24/7 usage or for just benching, seems crazy gettin 3.6ghz on air for that vcore?
 
Associate
OP
Joined
25 Jan 2008
Posts
24
3.6ghz

Right im at 3.6ghz the tempreture has gone up 1c and the vcore is set to 1.4v. CPUID shows vcore at 1.37v

http://valid.x86-secret.com/show_oc.php?id=351273

clock36ghzft6.jpg
 
Last edited:
Associate
Joined
21 Feb 2008
Posts
217
Location
Kent
Nice OC your getting good volts cos u got a processor with a nicer VID 1.2875, it seems the lower the VID the better it OC's, hoping to buy a Q6700 soon, hope i get a VID like that ;)
 
Associate
Joined
5 Jan 2004
Posts
663
Location
Sussex
How long does it Prime95 at 3.6 with that Vcore?

I've tried 3.6 with a Vcore 1.480 (CPU-Z) and backed it off. CoreTemp was reading 70,70, 66,66 across all four cores - which I thought was getting a bit high!

Idle temps (Windows / internet browsing etc) are currently at 34, 32, 32, 33. (still at 3.6)

Prime ran for 10min before I manually stopped it as I didn't like how hot it was getting.

I'm using a Tuniq Tower with some AS thermal paste underneath.
 
Associate
OP
Joined
25 Jan 2008
Posts
24
How long does it Prime95 at 3.6 with that Vcore?

I've tried 3.6 with a Vcore 1.480 (CPU-Z) and backed it off. CoreTemp was reading 70,70, 66,66 across all four cores - which I thought was getting a bit high!

Idle temps (Windows / internet browsing etc) are currently at 34, 32, 32, 33. (still at 3.6)

Prime ran for 10min before I manually stopped it as I didn't like how hot it was getting.

I'm using a Tuniq Tower with some AS thermal paste underneath.

Priming iv not dont yet as im needing to use my computer for work, but its running all my apps without fault. Im rendering using all 4 threads so my work is very intensive.

My Tower is a TT Mozart TX with 3x 120mm case fans, plus 2x 120mm on my Dual Rad, these are SilenX iXtrema ones.

My CPU block is holding its own here, and is doing a exceptional job. Im using a rare Silverprop Cyclone VE.

newpics124xe7.jpg
 
Back
Top Bottom