Associate
hey guys. i can't seem to forward any ports anymore with my netgear router ( 834 v3)
this is odd in that i had no problems previously. I updated to the latest firmware hoping this would fix it ( V4.01.37 ), but to no avail. DHCP range is set from 2 - 200 instead of 255 so i can set up a reserved IP address ( 192.168.0.201 atm). there are two other things connected to the pc. a wireless access point ( ip is reserved as .202 and another pc , reserved as .203 respectivly.
any ideas whats wrong?
LAN Port
MAC Address (removed by me for certain reasons)
IP Address 192.168.0.1
DHCP On
IP Subnet Mask 255.255.255.0
uPnP is turned on at the moment:
UPnP Portmap Table
Active Protocol Int. Port Ext. Port IP Address
YES UDP 16330 44031 192.168.0.201
YES UDP 7620 28381 192.168.0.2
this is odd in that i had no problems previously. I updated to the latest firmware hoping this would fix it ( V4.01.37 ), but to no avail. DHCP range is set from 2 - 200 instead of 255 so i can set up a reserved IP address ( 192.168.0.201 atm). there are two other things connected to the pc. a wireless access point ( ip is reserved as .202 and another pc , reserved as .203 respectivly.
any ideas whats wrong?
LAN Port
MAC Address (removed by me for certain reasons)
IP Address 192.168.0.1
DHCP On
IP Subnet Mask 255.255.255.0
uPnP is turned on at the moment:
UPnP Portmap Table
Active Protocol Int. Port Ext. Port IP Address
YES UDP 16330 44031 192.168.0.201
YES UDP 7620 28381 192.168.0.2
Last edited: