TJMax setting for Q9450 and RealTemp

Associate
Joined
11 Jun 2005
Posts
871
Location
Cheshire
I've been overclocking my CPU, a Q9450 and have it running nicely at 3.2Ghz and would like to know what TJMax setting i should use for this chip in RealTemp to keep an eye on the temperatures... Its default setting is 100 but i've seen elsewhere people say that for my chip i should set it to 95, could someone please confirm what i should set it to, thankyou in advance... :)

Oh, incase it makes any difference, its a revision C1 ship...
 
Caporegime
Joined
14 Dec 2005
Posts
28,071
Location
armoy, n. ireland
100c is the max for a 45nm cpu such as the q9450, 95 was a quoted figure for the older 65nm chips such as the q6600/6700 though im not sure if intel ever confirmed this.
 
Associate
OP
Joined
11 Jun 2005
Posts
871
Location
Cheshire
Thanks for the quick reply m8... I can now start stressing it and check the temps safely, as setting the TJMax too low would make the temps look cooler than they actually are... ;)
 
Soldato
Joined
3 Aug 2008
Posts
10,477
Location
Bath, England
i've set the tjmax to 95 on mine, seems to give more realistic temps as mine said it was idling at 65oC when it was running at stock.... when i get a temp probe on the copper of my waterblock i can see what sort of temps it is actually hitting
 
Back
Top Bottom