Antec 100 sexy photo shoot (phone camera - before you complain)

Soldato
Joined
8 Sep 2003
Posts
22,850
Location
150 yds from OcUK
Hey guys

Please see my photo shoot fun.

IMAG0096.jpg


IMAG0097.jpg


IMAG0093.jpg


IMAG0092.jpg


IMAG0091.jpg


IMAG0090.jpg


IMAG0089.jpg


IMAG0088.jpg


IMAG0087.jpg


IMAG0085.jpg


IMAG0084.jpg


IMAG0083.jpg


IMAG0082.jpg


IMAG0094.jpg
 
Associate
Joined
2 Feb 2006
Posts
375
Location
Chepstow, Wales
Got mine a few days ago and put a Gigabyte GA-890XA-UD3, Phenom II X2 560, 4Gb corsair DDR1333 ram, three hard drives, Nvidia 9600GT, Soundblaster Elite Pro and Antec 500W psu into it.
Found out that even with the motherboard(ATX), there is a gap between the left edge of the board and the back of the case meaning that my sound card and graphics card when screwed in nearly pulled out of the sockets.
CPU has 3 cores all working ok as the motherboard as auto unlocking.
First time I tried, all four cores were enabled but sound and graphics acted up.
I disabled one of the cores and now it runs great with three.
Only thing I do not like about the case is that the so called front filter is just the perforated front bezel and there is no way of fitting front fan filters.
I looked at the front fan mount from the antec 200 and it looks like it would fit because the 100 and 200 case behind the front bezel looks like they are the same.
 
Associate
Joined
2 Feb 2006
Posts
375
Location
Chepstow, Wales
If this has no intake fans isn't it going to fill up with dust?

You can fit two fans to the back of the front"bezel".
There is no way you can fit any sort of filters to the fans because the clips that hold the fans are in the way.
I found that out after paying for two filters that screw on to fans.
There is no way at all to fit filters anywhere.
The"filter"is the perforated front of the case.
 
Soldato
Joined
3 Aug 2007
Posts
2,519
Location
London
I still prefer my 300's looks and size. I just need to modify it more to be like the inside of this :p

300 cable tidying is a horror. I need to get a dremel.
 
Back
Top Bottom