Associate
Has anyone changed number plate bulbs? I've managed one but there doesn't seem to be enough loose wire to pull the bulb holder out from the other side.
Anyone had the same problem?
Anyone had the same problem?
Replacing interior bulbs with LEDs
- Thread starter snips86x
- Start date
I changed mine today and they popped straight out. The connector does get a little stuck so you may have to wiggle it a bit but only because its bulky!
Just thought I would update this as I had a fully charged phone!
Got some white LEDs through the post so changed the heater temp indicator (blue is really bright now, just need to swap the red side round), also changed the bulb for the ignition ring.
I also tested the main cluster, 3 of my extra LEDs are not lighting up so need to check my solder, hope to have it done for the weekend. Will get a thread going when its done!
Got some white LEDs through the post so changed the heater temp indicator (blue is really bright now, just need to swap the red side round), also changed the bulb for the ignition ring.
I also tested the main cluster, 3 of my extra LEDs are not lighting up so need to check my solder, hope to have it done for the weekend. Will get a thread going when its done!
