One of the main feature/purpose of the DXRacer chair is to help people to sit properlyMine should be arriving in a few hours. Praying it suits my lanky frame and retarded seating posture.
Anyone?
Really need to know if this needs to go back or not.
A question for you now - when you put yours together was the left-hand side connector panel completely loose/free-floating forward and backwards? The right-hand side is fixed on mine as it is controlled by the release arm but the left-hand side was completely free-floating.
Moley
I have the older model OH/D03/N so not sure what the equivalent is now.
However there is a small gap at the back. It's difficult to explain as it was a while ago that I assembled it but when I first installed it the gap was on a slant, I loosened (think I removed) the bolts that I had put in when putting the back on and spent more time aligning it properly and it was OK so you could try that. There is a small gap still but to be honest I use the back best cushion at the bottom so I can see anything anyway :
sorry for poor pic.
A question for you now - when you put yours together was the left-hand side connector panel completely loose/free-floating forward and backwards? The right-hand side is fixed on mine as it is controlled by the release arm but the left-hand side was completely free-floating.
Good luck with that...
According to Youtube, you need a hammer and a plumber's wench and the gaslift will then be damaged so unlikely to be able to be returned to overclockers.
It looks like the chair may have to be returned with the seat attached to the gaslift, which, I suspect, means that it won't all fit in the original box
Are these any good????