Only MAJOR overclockers need apply - survey!

Soldato
Joined
25 Feb 2004
Posts
9,393
Location
Heckling for change
Do you have what it takes to be amongst the elite @ OCUK?

Looking for the highest overclocks possible. It doesn't have to be stable! only enough for screenies!

As an example i would like only XPm's OVER 2.5GHZ
I need proof as in CPUZ screenies and details! ie fsb - volts, type of cooling.MB, ram, steppings if possible!

DO YOU HAVE THE POWER???

no accountability for singed eyebrows will be accepted! Enter at your own risk!!!

Host Screenies on your own web space or a site such as uploadit.org

made a 56k friendly version of the table :D

Split the table into 2 pages due to it's MAJOR size!

http://www.weescott.co.uk/overclocking_amd.asp
http://www.weescott.co.uk/overclocking_intel.asp


My proof:
weescott-2838.jpg
 
Last edited:
Permabanned
Joined
16 Nov 2002
Posts
2,214
Location
Dirty Gloucester!
STABLE

CPU1.JPG


Running my Athlon XP 1700+ JIUHB DLT3C 0308 at 2.4ghz fully prime stable at 1.85v, air cooling.

Motherboard : Abit NF7-S 2.0

The GeiL Value ram is running at 219 FSB @ 2.7v , 11-3-3-2.5 timings.

100% fully stable :D

UNSTABLE

2.6ghz (200 x 13), 2 volts.

Managed to get past the POST, but restarts itself halfway loading Windows XP. Hopefully water-cooling will do the trick! :)
 
Last edited:
Soldato
Joined
8 Nov 2003
Posts
7,409
Location
UK
Intel Pentium 4 Prescott 2800Mhz @ 3500Mhz On air - 1.4Vcore
GeiL PC3700 512Mb @ 2.5, 3, 3, 7 - 2.75v
Asus P4C800E-Deluxe

Not stable.
 

leo

leo

Associate
Joined
29 Nov 2003
Posts
1,885
Location
Nottingham
Intel P4 3 GHz SL6WU Malay 30 cap at 3.75 on stock volts with Corsair PC4000 Ram in 1:1. Rock stable (prime and memtest).

Getting a vapo pe next week alongwith a new 3.4C and Adata Vitesta PC4000 (which does 275FSB @ 2.85v) and hoping to break 4.2-4.3 Ghz with that setup :)

Screenies to follow
 
Soldato
Joined
7 Jun 2003
Posts
6,234
Location
Leicestershire
If it doesnt have to be stable, im sure i can get 2550 or more from my 2500+ desktop.

Definatly just cpu-z and paint stable?

Im a doofus, my tagan isnt here, i cant switch it on :rolleyes:

Keep this thread up guys, tagan should be back next week :D
 
Soldato
Joined
7 Jun 2003
Posts
6,234
Location
Leicestershire
Count me in then, i think i have one of the best on air, even if it wont go stable! :p

And if i kill it in the process, its a good reason to buy a XPM :D

Edit: Meant best desktop athlon.
 
Last edited:
Associate
Joined
18 Oct 2002
Posts
784
Location
Isle of man
2.4c-3.6-def.jpg

2.4c nw 12 capper malay (nice chip never been abused)
stock volts
ic7 no mods
stock cooling
nb fan broken
badly undervolting
250 watt no name psu with 11.2 v +12v rail heheh
not quite 100% stable


3-2c-1.7v.jpg

3.2c nw 30 capper hand picked cherry malay
ic7 max3
vapo LS
ram 1:1 adata vitesta ddr 500
pc power and coling 510 deluxe (amazing psu)
100% stable
 
Soldato
Joined
9 Dec 2003
Posts
6,204
Location
Gone......
YOU AND YOUR CHALLENGE!!!
angry.gif


I went and took up your challenge. TWO HOURS AGO!!

Had my XP2500M at [email protected]!!

Then BIOS crapped on me!!!
cry.gif


Took me until now to get everything back to normal!!

The next time you're going to post one of these challenges, put "Mickey_D, DO NOT ENTER" in the title, please!!!!
hammer.gif
 
Soldato
Joined
18 Oct 2002
Posts
3,063
Location
HELLAS
here i am again...:D

Max screen...3.4E prescott D0 @ 5202Mhz

Got another board to try out..the IC7 MAX3 which is supposed to override the 1.6V max voltage in prescotts iirc so theres more to come-fingers crossed.. eheh

few more weeks till i get my pc up and running again...



5202mhz.jpg


and a better pic of a lower clock...

5100+cpuz.gif
 
Last edited:
Back
Top Bottom