3600 cl14 bargain

Associate
Joined
9 May 2009
Posts
1,072
Got the Viper 4400Mhz stuff. Installed last night straight to 1:1 3600Mhz CAS 14 and all other timings/voltages as per FAST profile on DRAM Calculator.
94% quality.
This stuff is great. Replaces Corsair Vengeance LPX 3200Mhz.

What are all the timings ? 14-14-14-14-34 ? Been undecided on this ram. And is the voltage at normal or did u have to up it.

Have you tried 3733. What motherboard are u using

Thanks
 
Associate
Joined
18 Oct 2002
Posts
487
Location
East Lothian
At 3733Mhz now, Timings are 14-15-16-15-32, 1T, 1.45V
I think the timings will come down a bit but been messing with the secondary timings too.
Voltage I banged up straight away so don't know if it needs that yet.
Played Halo Reach for a couple of hours last night and was rock stable.
 
Soldato
Joined
18 Aug 2005
Posts
13,170
Location
Shropshire
At 3733Mhz now, Timings are 14-15-16-15-32, 1T, 1.45V
I think the timings will come down a bit but been messing with the secondary timings too.
Voltage I banged up straight away so don't know if it needs that yet.
Played Halo Reach for a couple of hours last night and was rock stable.

You need to run Memtest overnight for stability, games are not a test for memory!
 
Soldato
Joined
18 Aug 2005
Posts
13,170
Location
Shropshire
Well for me I only care about games so if I can game without issue then it is stable in my book. Only purpose my PC fulfils is gaming.

Your ram is used for storage, if that ram is throwing errors you're at risk of corrupting your game files and windows files, one day you might not be able to play those games anymore...
 
Associate
Joined
18 Oct 2009
Posts
588
32Gb installed this week so still fiddling.
Taichi X570 3600 Mem and IF

Quick n dirty fiddle to get up and running.
tRCDWR 8
tCL 16
tRCDRD 15
tRP 15

1.37 volts

Still lots to play with.
 
Associate
Joined
16 Jun 2015
Posts
587
1866 @1.5v 3733MHz: 14-14-14-14-28-40-4-4-12-4-8-14-Auto-4-4-248-184-113-14-8-8-1-1-6-6-1-5-5-1 1T GDM enabled (keeps failing memtest with it disabled)

any tips?
 
Soldato
Joined
15 Oct 2019
Posts
11,656
Location
Uk
1866 @1.5v 3733MHz: 14-14-14-14-28-40-4-4-12-4-8-14-Auto-4-4-248-184-113-14-8-8-1-1-6-6-1-5-5-1 1T GDM enabled (keeps failing memtest with it disabled)

any tips?
Tbh what you got there looks pretty good and I think you will struggle to improve, you could try CL to 15 with gdm off but it still might be better running 14 with it on and it may error anyway.
 
Associate
Joined
16 Jun 2015
Posts
587
I was going to try 1.53v next as I'm hearing these Samsung chips love the volts!

still no luck at 1800mhz/3600

also any tips for flck at 1900? (3800ram) wont post at all! even slack timmings aka stock with sov 1.15/ an vggs 1050/1050/950

https://imgur.com/4gfStD0 - MaxxMem

https://imgur.com/a/1055MMG - Ryzen Master

cpu is locked in at 1.33 ish drops to 1.31 under full load
 
Last edited:
Associate
Joined
11 Apr 2020
Posts
2
I just got them for £130 from OC, going with a Ryzen 3600.

3600C14 would be fantastic; anything higher with C14 would be a wet dream, but I've never tried upping my CPU's IF before.
 
Associate
Joined
16 Jun 2015
Posts
587
I just got them for £130 from OC, going with a Ryzen 3600.

3600C14 would be fantastic; anything higher with C14 would be a wet dream, but I've never tried upping my CPU's IF before.

nice choice! you wont be disappointed great ram and lifetime warranty
 
Associate
Joined
11 Apr 2020
Posts
2
nice choice! you wont be disappointed great ram and lifetime warranty
I got it because it'll be a set I can carry through a fair few upgrades.
If I end up back on Intel it'll come in handy, or if the Ryzen 4000 series' memory controller improves again :)
 
Associate
Joined
16 Jun 2015
Posts
587
I got it because it'll be a set I can carry through a fair few upgrades.
If I end up back on Intel it'll come in handy, or if the Ryzen 4000 series' memory controller improves again :)

didn't even think about that!
good shout would be nice to maybe have the infinity fabric at 2000mhz! (possibly with Ryzen3000)
 
Back
Top Bottom