Gigabyte X570 Aorus Elite new bios F12h

[superleeds27]

Er, yes. 4 days then.

I lose all track of time with this work from home malarky...

Still on F20h, not going to bother flashing to F21 if its just 'memory compatibility,

F30a on its way up. Possibly beta/alpha.

"Update AGESA ComboV2 1.0.8.1 for New Gen AMD Ryzen processors support"

 

[megatron]

F30a available.

 

[superleeds27]

F30a available.

Will be Alpha/BETA hence the letter at the end.

 

[megatron]

I notice AMD have updated their X570 sata/raid drivers. I'm using a raid10 on my board currently without raidxpert2. So if I upgrade my bios it potentially could mean my memory overclock is unstable (happened last time from F12f to F12h), and I could lose my array. I lost my array but it came back again after I booted into windows (I think aslong as you don't delete it in the bios it picks itself back up)(I lost it after leaving it running for over a week I believe booted from the array itself). It may be that raidxpert2 helps with stability, it rechecks the array when you install it.

 

[Notime4games]

f30a removed from the Gigabyte website - now the latest is F21. Assume they may be replacing f30a with f30?

 

[opethdisciple]

f30a removed from the Gigabyte website - now the latest is F21. Assume they may be replacing f30a with f30?

I noticed that also.

 

[Notime4games]

F30 full release is out. I'm still on F20, but debating updating it later today

 

[bazman25]

F30 full release is out. I'm still on F20, but debating updating it later today

same here does anyone know what the AGESA ComboV2 1.0.8.1 is?

 

[superleeds27]

same here does anyone know what the AGESA ComboV2 1.0.8.1 is?

https://www.guru3d.com/news-story/n...lly-improves-latencies-between-cpu-cores.html

 

[Notime4games]

I installed F30 today - computer is running OK but am getting some strange errors when trying to install new applications or open certain applications. "windows 10 error 0x80004005". Anyone had a similar experience after updating BIOS?

 

[bazman25]

https://www.guru3d.com/news-story/n...lly-improves-latencies-between-cpu-cores.html

thanks interesting.. i might update mine then

 

[havenrl]

Totally forgot about my bios.
Checked it after reading through this tread, I was on F10.
Upgraded to F20.

Just a few settings to tweak, that's okay for me, settling into the new bios.

 

[Buffalo2102]

Why not F30?

 

[Brizzles]

Been running F30 for a few days now, no issues to report.

 

[havenrl]

Why not F30?

Cos I've skipped a few bios, I didn't want to upgrade to the latest in case of troubles, settled on a bios that works well.
Will probably upgrade to F30 soon

 

[megatron]

F30 is the only one that matters if you're upgrading to 5900x/5800x. I've never upgraded a bios whilst running raid 10. I have a backup 2 backups of my data so not an issue if it goes **** up. Also I've experienced memory tuning to not carry over from f12f to f12h, so I need to wait till I've got time to potentially redo my RAM settings. Only 3600Mhz 16,16,15,32 1t 288tRFC (4 x 8GB b-die @ 1.35v) geardown mode enabled.

 

[Buffalo2102]

Yes, timings always need to be redone after a flash. I've been on f30 for 2 weeks now and not had any issues. 3800MHz 16-18-18-18 1t.

Having said that, I've not had a real issue with any BIOS version on this board, even betas.

 

[superleeds27]

Anyone using the latest F37 beta?

 

[megatron]

I've got an MSI B550 Tomahawk now. Nothing wrong with the board except it went walkies.

 

[superleeds27]

I've got an MSI B550 Tomahawk now. Nothing wrong with the board except it went walkies.

Prefer that to the GB?