I was going to buy but told to wait.

orbitalwalsh · 7 Oct 2020 at 10:29

Ynot said:
Will that 10850K CPU support AVX2, that's required for Edius X ?

Thanks.

Yep . And quick sync so don't need Nvidia for exporting though mid range card using h.265 will do it quicker

https://ark.intel.com/content/www/u...0850k-processor-20m-cache-up-to-5-20-ghz.html

https://en.wikichip.org/wiki/amd/ryzen_9/3900x

Ynot · 7 Oct 2020 at 10:55

orbitalwalsh said:
Yep . And quick sync so don't need Nvidia for exporting though mid range card using h.265 will do it quicker

Good news Thank you again.

Ynot · 7 Oct 2020 at 16:32

Off topic I know but just when your there,
I was going for a new build about two years ago and bought a few component's for it at the time but turned out, I didn't go ahead with the build.

I take it the Thermalright Macho Rev.8 I bought is no good for the 10850K ?

Thanks.

mickyflinn · 7 Oct 2020 at 16:38

Ynot said:
Off topic I know but just when your there,
I was going for a new build about two years ago and bought a few component's for it at the time but turned out, I didn't go ahead with the build.

I take it the Thermalright Macho Rev.8 I bought is no good for the 10850K ?

Thanks.

Quality cooler it will fine for the 10850k

Ynot · 7 Oct 2020 at 17:02

mickyflinn said:
Quality cooler it will fine for the 10850k

What!!! can't believe it

that's great news, will I need any wee attachment or is all in the box? bought new BTW.

Thank you.

mickyflinn · 7 Oct 2020 at 17:26

Ynot said:
What!!! can't believe it that's great news, will I need any wee attachment or is all in the box? bought new BTW.

Thank you.

Everything will be in the box, but just check to see if there's any thermal paste provided.

Ynot · 7 Oct 2020 at 18:01

mickyflinn said:
Everything will be in the box, but just check to see if there's any thermal paste provided.

Had a look and no, no paste, next question

what's the best thermal past to buy?

Thanks mickyflinn.

mickyflinn · 7 Oct 2020 at 18:52

There isn't much between pastes but I would choose THERMAL GRIZZLY KRYONAUT HIGH PERFORMANCE THERMAL PASTE

https://www.overclockers.co.uk/ther...formance-thermal-paste-1-gramm-th-020-tg.html

Ynot · 7 Oct 2020 at 19:32

mickyflinn said:
There isn't much between pastes but I would choose THERMAL GRIZZLY KRYONAUT HIGH PERFORMANCE THERMAL PASTE

https://www.overclockers.co.uk/ther...formance-thermal-paste-1-gramm-th-020-tg.html

Good enough for me then

thanks mickyflinn

Ynot · 20 Oct 2020 at 18:14

mickyflinn said:
There isn't much between pastes but I would choose THERMAL GRIZZLY KRYONAUT HIGH PERFORMANCE THERMAL PASTE

https://www.overclockers.co.uk/ther...formance-thermal-paste-1-gramm-th-020-tg.html

I know AMD announced new CPUs but I think I'll go Intel, I like the quick sync, I use it almost daily

I'm almost ready to place this order but i thought I'd like you guys to look over it first and advice.

Z490 TAICHI MOTHERBOARD

https://www.overclockers.co.uk/asro...-lga-1200-ddr4-atx-motherboard-mb-17d-ak.html

VENGEANCE LPX 32GB (2X16GB) DDR4
https://www.overclockers.co.uk/cors...channel-kit-black-cmk32gx4m2a2-my-452-cs.html

CORE I7-10700K
https://www.overclockers.co.uk/inte...ocket-lga1200-processor-retail-cp-68r-in.html

And I already have the Thermalright Macho Rev.8 (Hope it keep that CPU cool)

Thanks all.

mickyflinn · 20 Oct 2020 at 18:39

Would get 3200mhz ram , looks like you dropped down from the 10850k.

Do you need such an expensive motherboard ?

Msi are doing cashback on motherboard and cpu combos, bought from participating retailers.

https://uk.msi.com/Promotion/back-to-school-2020#Intel-Motherboard

Ynot · 20 Oct 2020 at 18:50

mickyflinn said:
Would get 3200mhz ram , looks like you dropped down from the 10850k.

Do you need such an expensive motherboard ?

Msi are doing cashback on motherboard and cpu combos, bought from participating retailers.

https://uk.msi.com/Promotion/back-to-school-2020#Intel-Motherboard

Thanks mickyflinn, what I like about that MB is it has 8 sata sockets, and I would need them all.

Aye, I dropped down on the CPU, I have a 2700K in my current PC and I thought again that I don't really need the 10850k, I would imagine the cheaper CPU will do my job every bit as good, it might not be as fast, but a lot faster than my 2700K.

So, 3200mhz ram would be a better choice, thanks.

Thanks for the MB link, I'll look that up. What motherboard you have in mind? (just had a look at them but only 6 Sata sockets on the board)

Thank you.

mickyflinn · 20 Oct 2020 at 21:10

Ynot said:
Thanks mickyflinn, what I like about that MB is it has 8 sata sockets, and I would need them all.

Aye, I dropped down on the CPU, I have a 2700K in my current PC and I thought again that I don't really need the 10850k, I would imagine the cheaper CPU will do my job every bit as good, it might not be as fast, but a lot faster than my 2700K.

So, 3200mhz ram would be a better choice, thanks.

Thanks for the MB link, I'll look that up. What motherboard you have in mind? (just had a look at them but only 6 Sata sockets on the board)

Thank you.

Was just trying yo save you some money but if you need 8 sata ports that's understandable.

Good luck with your build.

Ynot · 20 Oct 2020 at 21:19

Thank you so much for your help.

orbitalwalsh · 21 Oct 2020 at 07:47

Ynot said:
Thank you so much for your help.

know your after as many sata ports. checked manual to see if any are deactivated with populated m.2 slots ? Two extra either come from a controller or share PCIe lans

Ynot · 21 Oct 2020 at 10:31

orbitalwalsh said:
know your after as many sata ports. checked manual to see if any are deactivated with populated m.2 slots ? Two extra either come from a controller or share PCIe lans

Thanks orbitalwalsh. I was thinking of using an ssd for system drive, for now anyway but i will also check the manual.

Thanks.

mickyflinn · 21 Oct 2020 at 10:57

orbitalwalsh said:
know your after as many sata ports. checked manual to see if any are deactivated with populated m.2 slots ? Two extra either come from a controller or share PCIe lans

Very good point

Ynot said:
Thanks orbitalwalsh. I was thinking of using an ssd for system drive, for now anyway but i will also check the manual.

Thanks.

Hers what ports are disabled if using more than 1 m2 ssd.

M2_2, SATA3_0 and SATA3_1 share lanes. If either one of them is in use, the others will be disabled. M2_3, SATA3_4 and SATA3_5 share lanes. If either one of them is in use, the others will be disabled. M2_3, SATA3_4, SATA3_5 and USB32_TC_1 share lanes. If either one of them is in use, USB32_TC_1 will downgrade to 16 Gb/s max. M2_3 and USB32_TC_1 share lanes. If either one of them is in use, M2_3 and USB32_TC_1 will downgrade to PCIe Gen3 x2 (16 Gb/s).

https://www.asrock.com/mb/Intel/Z490 Taichi/#Specification

orbitalwalsh · 21 Oct 2020 at 11:04

even Aorus master with 6 sata ports gets eaten.
using the LAST M.2 with NMVe takes away 2 of the 6 sata ports. All 6 can still be used with middle and top NVMe m.2 being populated

mickyflinn · 21 Oct 2020 at 11:10

orbitalwalsh said:
even Aorus master with 6 sata ports gets eaten.
using the LAST M.2 with NMVe takes away 2 of the 6 sata ports. All 6 can still be used with middle and top NVMe m.2 being populated

Do you think it would be better to go cheaper motherboard with let's say a 4 port sata card.
?

orbitalwalsh · 21 Oct 2020 at 11:14

mickyflinn said:
Do you think it would be better to go cheaper motherboard with let's say a 4 port sata card.
?

price of Taichi/Master/Strix etc and needing FULL 6 + sata and maybe 2 or more m.2 then def Add in Card . specially if good PCie 3.0 4x speed one can be had etc