Cooler Master NR200P ITX Case Build & Mod Project

Associate
OP
Joined
25 Jan 2006
Posts
2,057
Location
Kent ,UK
@Jilneas, Yes you will need something like what I used:
Evergreen Goods Ltd 50 Sheets A4 White Premium Glossy Self Adhesive/Sticky Back Label Image Resolution Printing Paper Sheet £8.99 50 sheets,
for Inkjet and Laser printers
don't worry, The Adhesive sheet peels off easily if you make a mistake.:)


I use Inkjet Printer for the photo like Mine: Epson XP-750.

Use a free Picture edit program to resize the image
like "Irfan view" or GIMP.

Set to portrait
Set printer to Glossy
Photo picture quality or better
A8brKtU.png
 
Last edited:
Associate
Joined
17 Nov 2020
Posts
4
Oh how nice - Do you think an HP PageWide ink printer could do the same job or does it have to be a photo printer?
We have large Designjets at my work but they probably cant take an A4 paper in.
 
Associate
Joined
17 Nov 2020
Posts
4
Do you have any experience regarding a black background? My Nr200P is a black version, and i want the print to be white ontop of it, but will the rest of the paper show?
 
Associate
Joined
17 Nov 2020
Posts
4
Oh wait i just realized you have used just a glossy white adhesive paper, not a transparent paper, my bad! Thanks for all your help Darren! and sorry to interrupt you!
 
Associate
OP
Joined
25 Jan 2006
Posts
2,057
Location
Kent ,UK
That be hard since there are lots of air vent holes on the top panel
That's right, Transparent paper will not work on Black, only white or silver

I went for this as its pure white glossy paper to make the NR200P more white than cream/white, I did not use Transparent paper this time around.
 
Last edited:
Associate
OP
Joined
25 Jan 2006
Posts
2,057
Location
Kent ,UK
Update: 22/11/20
Swapped out my 2070 Super for an AMD 6800 Reference card,
The first Reference graphics card I have seen with 0DB fan stop.

Note: If you are Using the Riser cable that comes with the NR200P
& a B550/X570 motherboard make sure you set the bios to PCI-E speed to 3.0
before swapping out your old card for a 3000 series or 6800 AMD
otherwise, The PC just beep with a blank screen.
This riser cable only supports up to PCI-E 3.0, not 4.0 or AUTO

2emVvDS.jpg

qA0K8Vz.jpg

oZihlUP.jpg

D9XE3i7.jpg

6Rp6gLn.jpg

D2JycMd.jpg
 
Last edited:
Associate
OP
Joined
25 Jan 2006
Posts
2,057
Location
Kent ,UK
Great Running in the NR200, Desktop temps stay in the low 30c,
will rise a little more from 60hz to 144hz enabled
fans spin underload gaming reach around 62/72C, MAX Temp of the cards are 105c. :)

Just as silent than my Gigabyte 2070 super x3 fans card

Very impressed with the 6800.
the 6800 XT will get more hot due to more Watts & performance
 
Last edited:
Associate
OP
Joined
25 Jan 2006
Posts
2,057
Location
Kent ,UK
AMD 6800 Reference card Desktop idle & in-game Temperature

Temps are higher on Desktop with 144hz mode enable due to more GPU power/watts


6FSYTCM.png
fans are dead silent in-game.
Setting the Monitor to 60Hz makes the "VRAM CLOCK Speed" goto only 192Mhz
& Power Consumption only 8/16w, making the temps around 34c idle
 
Last edited:
Associate
Joined
11 Jul 2020
Posts
110
AMD 6800 Reference card Desktop idle & in-game Temperature

Temps are higher on Desktop with 144hz mode enable due to more GPU power/watts


6FSYTCM.png
fans are dead silent in-game.
Setting the Monitor to 60Hz makes the "VRAM CLOCK Speed" goto only 192Mhz
& Power Consumption only 8/16w, making the temps around 34c idle

Wow those are impressive temps really tempting me to get NR200 but I want to hi down the air cooling route.
 
Associate
Joined
19 Jan 2021
Posts
1
Hi there,

I’m just starting my NR200P build! I have a question about your glass side panel. I’d like it to be white as well around the edges, like what you did. I don’t need to drill holes in the glass, but would like it to be surrounded by white :) Can you explain what you did in that side glass window mod?

Thanks!!
 
Associate
OP
Joined
25 Jan 2006
Posts
2,057
Location
Kent ,UK
Hi there,

I’m just starting my NR200P build! I have a question about your glass side panel. I’d like it to be white as well around the edges, like what you did. I don’t need to drill holes in the glass, but would like it to be surrounded by white :) Can you explain what you did in that side glass window mod?

Thanks!!

Hello, Sorry for a late reply, not been on the forums that much, If you using the Tampered glass panel that comes with the NR200P version...
(1) don't drill holes in a tampered glass panel, it shatters/ Bang :eek:
(2) I did not use the Temp glass panel & ordered an acrylic sheet & cut down to size to drill holes in
(3) are many 'white' Crafting tapes single-sided Adhesive & A4 single-sided Adhesive Sheets from Online stores you can cut to size to place over the black borders,
 
Last edited:
Back
Top Bottom