Asus ROG Thor 1200 watt PSU question

Associate
Joined
26 Jan 2010
Posts
1,631
bought a rog thor 2 weeks ago

have not had time to add to my current build, out of interest just because i wanted to see the RGB and the side panel display I plugged in the 3 pin PSU cable to the unit and plugged it in and switched on the power.

I expected the PSU to switch on, led lights and side display but nothing happens, no power

Do you have to connect everthing to the PSU to switch on, re the 24 pin mobo connector and gpu ect?

atleast the lights should have come on right?
 
Soldato
Joined
6 Jun 2008
Posts
11,618
Location
Finland
You need to short the power on pins in the 24 pin cable. With just the kettle lead plugged in it'll behave as any psu would in a computer that is off.
This is the problem.

When getting power (with rear switch in on position) PSU has only 5V standby running, until given PS ON signal by motherboard.
 
Back
Top Bottom