LOGGING ON TO A NETGEAR MR814v2

Soldato
Joined
18 Oct 2002
Posts
10,381
Location
Behind you... Naked!
Unless I am going stupid here, but I amtryign to configure my router.

Its a Netgear MR814 v2

Its connected to the internet via a BT Voyager 205

According to everywhere I look, all I have to do, is enter

http://192.168.0.1

into the addy bar, but at best I get the usual Web page unavailable rubbish?

I can talk to the Modem by entering 192.168.1.1 and this is about as far as I can get.

Now, dont get me wrong here, I am able to access the internet almost as I need to, and I have full access to the net with all my PCs but I am missing somethign with the wireless side of things, and I am just stabbign at straws perhaps, but is there any way to find out what I need to enter to actually get at this on the router?

Or am I missing the point?
 
Caporegime
Joined
16 May 2003
Posts
25,368
Location
::1
What IP does the machine you're using have?
If it's 192.168.1.x, you're going to have trouble getting to an IP in a different subnet (192.168.0.1)...
 
Soldato
OP
Joined
18 Oct 2002
Posts
10,381
Location
Behind you... Naked!
Yes, my IP Address is 1.3 ( Assigned by DHCP )

Default Gateway is 1.1

Any docs I read, are saying 0.1 to access the router, and the modem I can access by entering 1.1... The Gateway obviously!

So, can you expand on any of this, or better still, what can I do to get the PC to open to the router?
 
Caporegime
Joined
16 May 2003
Posts
25,368
Location
::1
FatRakoon said:
Yes, my IP Address is 1.3 ( Assigned by DHCP )

Any docs I read, are saying 0.1 to access the router, and the modem I can access by entering 1.1... The Gateway obviously!

Yes...but if your machine's in a different subnet, it's not going to be able to access it.
It would need to have an IP in the router's subnet - ie 192.168.0.x.
 
Back
Top Bottom