Hows my clocking??? corsair XMS questions.

Permabanned
Joined
11 Mar 2004
Posts
5,884
wanted to start a quick discussion about my memory here, are there any better configurations to use? also, i managed to set my mobo to 1T which seems to be working fine but i had to drop the CAS from 2.0 to 2.5 to get it to boot is this normal and should i stick with this or go back to 2T with cas 2.0?

p.s. here are my details.

latestbench2yh.jpg
 
Suspended
Joined
17 Mar 2006
Posts
9,055
Set RAS to 3, TRAS to 6. Set Command to 1T. It should now work. You want to use 1T before clocking/setting lower timings. Then decide to overclock RAM or tighter timints (ie CAS 2 @200mhz, or CAS 2.5 @250mhz) I have the same stuff btw
 
Permabanned
OP
Joined
11 Mar 2004
Posts
5,884
squiffy said:
Set RAS to 3, TRAS to 6. Set Command to 1T. It should now work. You want to use 1T before clocking/setting lower timings. Then decide to overclock RAM or tighter timints (ie CAS 2 @200mhz, or CAS 2.5 @250mhz) I have the same stuff btw

okeydokey, will give it a go in the morning :)
 
Back
Top Bottom