Semprom 2800 @ 2.7GHz

Associate
Joined
13 Jan 2004
Posts
1,443
Finally got one those DFIs nForce 3 boards and what a board it is!

Currently at 2.7GHz with 340HTT does 2.8GHz with 350HTT but abit unstable, I feel its the memory timings

Any help on these? the board has loads of memory options for tweaks, quite a few I don't really understand!

Did a quick PI test at 1M - 35secs
 
Associate
OP
Joined
13 Jan 2004
Posts
1,443
Ram is mushkin PC3500 currently with divider (can find out when I get home)

Timings are 3-4-4-11-1T think it may be the 1T need 2T, but can't find adjustment for this!
 
Last edited:

Mul

Mul

Associate
Joined
26 Aug 2004
Posts
1,841
It'll be named Command Per Clock. Enable is 1T, and Disable is 2T. It'll be in memory configuration.

Mul
 
Soldato
Joined
9 Jan 2005
Posts
4,427
Location
Stoke-On-Trent
mofo's said:
Finally got one those DFIs nForce 3 boards and what a board it is!

Currently at 2.7GHz with 340HTT does 2.8GHz with 350HTT but abit unstable, I feel its the memory timings

Any help on these? the board has loads of memory options for tweaks, quite a few I don't really understand!

Did a quick PI test at 1M - 35secs

Bows down you are the OC master. Thats very impressive you must be a Jedi. :D
 

str

str

Soldato
Joined
18 Oct 2002
Posts
3,052
mofo's said:
Ram is mushkin PC3500 currently with divider (can find out when I get home)

Timings are 3-4-4-11-1T think it may be the 1T need 2T, but can't find adjustment for this!
At 2T you'll lose somewhere around 4 to 6 seconds for SuperPI 1M.

What stepping is your Sempron and at what volts for 2.7Ghz and for 2.8Ghz?
 

str

str

Soldato
Joined
18 Oct 2002
Posts
3,052
Yeah I hadn't taken into account the ram probably is somewhere around DDR460 which should help a bit at the 3-4-4 timings. :)
 

str

str

Soldato
Joined
18 Oct 2002
Posts
3,052
Hrm, I just did a test and lost 5 seconds SuperPI 1M when switching from 1T to 2T with the ram at DDR400 2.5-3-3-7.

Could it be it's dropping so much because of only running at DDR400 or maybe because I'm clocked at only 2.4Ghz atm due to running at stock volts?

EDIT: Ignore my ramblings. :D I see only a ~2 seconds difference on a clean boot with nothing else running. :)
 
Last edited:
Back
Top Bottom