Soldato
Hi,
trying to install the DFI NF4 SLI Expert but for some reason the startup LED's located near the PCI slots on the board are stuck at 4 lights (i.e. CPU or RAM is not being detected and the lights aren't counting down). This is the first installation of this board I have made so Im not sure where IM going wrong. I have these components in place: Opty 146, 2 x OCZ PC3500, Geforce 6500, 1 x Raptor on sata port 1. Thats about it really, I've wired the front standby button in and the power LED's aren't flashing. I've tried all the Dimm slots and reseating the CPU but still nothing on the screen or from the motherboard. I've heard these boards can be fussey with the memory but shouldn't the system at least boot up into setup even if it doesnt liek the mem?
thanks in advance
CP
trying to install the DFI NF4 SLI Expert but for some reason the startup LED's located near the PCI slots on the board are stuck at 4 lights (i.e. CPU or RAM is not being detected and the lights aren't counting down). This is the first installation of this board I have made so Im not sure where IM going wrong. I have these components in place: Opty 146, 2 x OCZ PC3500, Geforce 6500, 1 x Raptor on sata port 1. Thats about it really, I've wired the front standby button in and the power LED's aren't flashing. I've tried all the Dimm slots and reseating the CPU but still nothing on the screen or from the motherboard. I've heard these boards can be fussey with the memory but shouldn't the system at least boot up into setup even if it doesnt liek the mem?
thanks in advance
CP
Last edited: