I miss the days when the scrap yard provided my radiator, steel screw clamps were the closest thing we had to fittings to secure the cheap tubing...
Ha! Thought it had swapped back into Mandarin for a second on the close up there :D I am tempted by a temp sensor, but realistically you can get a...
Funnily enough I do have an old Eheim kicking about - will do exactly that (although I may run the pump on it's own for a bit as it's probably not...
Cheers - that's what I thought - I've got a couple of bottles of de-ionised lying around, so if nothing else it'll give me an idea how much fluid...
What is the general feeling about flushing a new loop? I am just about to build a CPU/GPU loop in my Enthoo Pro (covered in another thread) and...
Wow - that's and awesome build! Must have been quite a challenge to install - not a lot of room to spare. That pic is really useful - I had...
That could be helpful - I didn't want to rotate the block as the writing would then be upside down - but if I can just rotate the block that could...
Thanks for the heads up on the inlet/outlet on the GPU - hadn't had a chance to look at it properly yet. In a weird way it may make things easier...
Alternatively - if I vertically mount to GPU I could hide almost all the pipework: [IMG] I'll definitely flip the front rad so I can drain from...
I did consider having the rad barbs at the back of the case, but I think I get a cleaner line by hiding them near the front. I think I will be...
I've had a little replan - added an additional 240 rad to the front and moved the routing around: [IMG] The idea is to keep the visible tubing...
I managed to pick up a 2080ti on the MM, but it came with a waterblock, which means I have had to give up on my nice, simple AIOs and build a new...
Since this is based on the legendary hammer - surely it need a handle. Possibilities are huge... You could have the on/off switch built into the...
Under the wind force 3 cooler the ram chips had thermal pads on them and were in contact with the metal of the main cooler - so had pretty good...
I'm waiting on a Corasir H55 to replace the old Antec Khuler 620 on my 980ti (kraken G10). I have had a nightmare trying to find a solution to...
Neat! That's a nice solution to give more space for the build.
I have just been through this with an old Antec Khuler 620. Had to remount it and a lack of fluid meant a large air pocket in the block and an...
Awesome looking builds! Out of interest - where on earth have you hidden the PSU - can't see it in the pics?
I've all but given up on tape - luckily I've managed to track down some paste - the european stuff is now prohibitively expensive, so it's auction...
I recently added an Antec Khuler 620 to my Gigabtyte 980ti using a Kraken G10. The install was fine but I cannot for the life of me get the RAM...
Separate names with a comma.
