Search results

Basically the kit is by NIDA and the model number is 012-3040 with 3040 denoting the size. Bought via summergardenbuildings.co.uk. link I called another company who sell NIDA and he said they don't use the provided box of screws or nails when they are installing. They don't use the nails...

Morning. I've got a 3x4m, 45mm log cabin kit. The instructions are very simple and I've no issues with the construction. They have provided a box of nails and screws and I'm just unsure which to use where. The log cabin has 45x70mm floor beams around the perimeter which half lap at the...

Nice one guys. Appreciated.

Would it a good idea to bolt into the walls at each side and the available fence posts along the back length?

Ah ok that's a good shout.

1500mm deep?

Full sun from first thing until 6pm

Hi. Looking to install a 11.5x2.4m decking at the bottom of our garden. The 11.5m length is backed by a shared fence which uses 6 sunk posts. The incline of that 11.5m length drops a foot or so from one end to the other. At one side (the lower side) there's a garage wall. The other side is a...

All the wiring around the house including these are 'Eaton'

I have tested the ends and have continuity on both side sfrom the wire through to the pins.

just had further reading that gigabit connection is 1000BASE-T and that uses all 4 pairs :(

Hi I moved into a new build Miller home in March and I had a cat5e cable fitted internally from the back upstairs bedroom to under the stairs with a termination plate at each end and all wired up correctly to B standard at both ends. This used to work fine running 200mb with a virgin media...

Ok, built this a couple of months back. Here's just a teaser, I'll have a little write up of problems and plans soon. Hope you like him...

Hi, my audio went absolutely haywire last night; crackling, juddering and a lot of white noise and then working normally. There's no pattern to this and this was across all sources (web, spotify etc). I tried enabling and disabling loads of stuff, even network drivers as suggested on one...

I haven't really noticed any whine with the sound of the gunfire and engine noise lol. I'll have a listen

Yeah, I can't see what the difference would be either. either way, one of the slots on either of the cards will be 1st or 2nd in line on the rail. Unless it impacts load balancing on the two rails, but I would have thought that the cards will be working using the same power consumption as they...

ooops, on it

well I was pushing war thunder on steam last night, max out everything for over an hour at 120fps and it didn't bat an eyelid.

Thanks for the responses. Can you explain why?

Hi I have two Zotac GTX970 cards in SLI They both have 2 6 pin power connections. I run these from a corsair cx750m. I have 2 pci power cables, each goes from 1 6pin at the psu and has two 6pin connectors inline / in sequence. Now my question is; should I have each rail for each card - using...