Search results

I have a RTX 3070ti Founders Edition. I know these run hotter than normal (around 82-84 degree under load gaming) so I wanted to try under-volting it. I ideally don't want to lose any performance as that is what you pay for but wanted to see how low I could get the voltage (temperature). I...

Not sure m8. I have a multi meter but I need guidance on what to check. I also found a schematic to download but again not sure where I should check. As both ports dont work and no power LED (even with a working charger) I assume something on the board is fried and needs replaced. All help...

The AC Adapter is 100% working. I tested it with my son's Nintendo Switch (which worked) and I tested his charger with the Chromebook (which didn't). This narrowed it down to Chromebook hardware. Do you have any info on how I can use a multimeter to test both of the charging ports and also what...

Hi, My grandads Asus C223N Chromebook has stopped powering. I done the usual checks for him and it turns out the AC Adapter is fine so its 100% something with the chromebook itself. When the AC Adapter plugs in the battery light doesn't show. I tried even disconnecting the battery to run...

1905MHz @ 925mV.. So far it has passed many Heaven (4482) and Time Spy, and also in the B4B mode no crashes... Max temps are around 74 degree and clock speed 1905-1920mHz. Think this is a good staple point. Got lower temps than stock and slightly better performance. I think from here I will...

Thanks for the help.. Yeah ideally I was never looking to "overclock", just keep the same speed but lower the wattage. I think picking 1860 @ 900 has done this but if someone in a similar boat could clarify would be great. Once I know this is my "new stock" setting then I can begin upping the...

Ok I changed Heaven to the 1080p settings shown in that thread and my results at stock were: Clock : 1875-1890 Max Temp : 79 AVG Watts : 280 Score : 3968 I then changed to 1890 @ 900mV and got this for the same Heaven settings: Clock : 1905-1920 Max Temp : 73 AVG Watts : 205 Score: 4496 Now...

So you tried at 900mV and if it failed moved to 925mV etc until it was stable? I am trying something similar just now, I done the exact tests above but moved onto 925mV, the 1965 crashed. I reverted and tried 1920, benchmark running at 1920, temps were around 73, wattage around 215, it passed...

Ok done a fresh test. Set all MSI Afterburner settings to stock and ran the Extreme Heaven (1440p windowed) and the Core Clock stayed around 1875, temps were around 80 deg, Wattage around 280. Score was 2796. I then done the same as you, -200 then dragged 900mV up to 1965 but the second I hit...

Appreciate it m8, Right now I have it set to 1905Mhz @ 925mV. So far it passed 3 runs of Heaven, 2 of TimeSpy and a little bit of gaming. Max temps around 74 deg.

I had an issue with either Heaven closing or the game closing so assumed it was unstable. Surely if I lower to 900mV using the standard 1890Mhz it should work yes? And if I kept increasing the mV it would end up close to where it was before. The other hand is reducing the Core Mhz but then that...

Got the USB mains powered hub but the buzzing was the exact same, so wonder if its a ground loop issue. May need to try the HD400 Hum Destroyer and see if that fixes it.

Not sure if I done this right... I opened MSI Afterburner and let it run while I ran Heaven Valley Benchmark on Ultra 1440p. During the benchmark running I noticed the core clock was 1890Mhz with temps of 79 deg. I installed MSI Afterburner, Pressed CTRL+F to open Curve Editor. In the Core...

Dont supose you could share the settings I should change to test this? Mine under load stock is around 79-80 deg.

How long should I leave it running? I will maybe try undervolting but I dont want to underclock as I am paying for speed I cannot use. What about the speakers side of things? I have a Scarlett 2i2 USB Interface with the speakers hooked into that. When I have then on its like a microphone for...

Hi, I have a 3070 ti Founders Edition and I have noticed the coil whine on it is quite loud. Anything from 60fps up you hear it like a bee. If I turn my yamaha hs5 speakers on it also amplys through those too. The card is about a week or so old and I have only started proper gaming on it. I...

Hi. I need some extension cables (3 pin) so I can run some Corsair LED strips from my PC to the back of my monitor. I know the expansion kits give you two small lengths but they arent enough. What options can I purchase to do this since corsair use the 3 pin header. Cheers

From what I know my motherboard is PCI 4.0. So its really down to get the pci 3 for under £40 and lose a couple of % or pay an extra £30 for Gen 4 to gain a couple more but still wont be full. Sounds like if I really want the vertical mount Gen 3 is better option.

Hi. I have a 4000X and a 3070ti FE with B550 Tomahawk. Does the Corsair PCI 3.0 x16 Riser Cable work fine with these or do I lose performance? Should I be getting a PCI 4.0 riser? If so which one? Thanks

Would be the best idea but don't want to invalidate a warranty for a GPU that was hard enough to get lol. Don't trust myself to make it look "clean" so that's why I was hoping there was places you could order one from. Maybe I will just need to give it a shot..