Search results

To be honest i dont really care what board i have i just want my ******* computer to bloody work, so far ive tried P4 3.6, E6600, Celeron D 2.66, corsair ddr2 xms2 800mhz, dell ddr2 533mhz, ati x600, x1650, x3780, None of the combonations are letting the board post it just loops on and off...

well i had a asus p5w dh and it stoped working RMA'ed it and i got sent a asus p5k-e wifi a worse board to start with, (only 8x 4x in crossfire compared to 8x 8x from the p5w dh) then when i put the computer back together it still woulded post. I thought i had killed my e6600 but im using it in...

yeah tried all the slots, single stick, etc etc, this is anoying now

thats the problem m8

my ram is corsair XMS2 C4 2x1gb's i thought this could be the problem but i check corsair website and it says there fine my cpu is a e6600 if that means anything?

nah there all on low rpm i think but for an instant there on, a bit of googling and that came up with other people having the same issue and it being called "powercycle" or somthing think the boards dead?? my psu is a seasonic 600watt it must be enough?

tried that already mate, nothing is even show on the monitor

i got it on RMA for an asus p5w dh deluxe (which i wasnt happy with cause the p5k only has 8x + 4x in crossfire) but when i put everything back into the mobo it just turns on for like 2/3 seconds then powers off and just keeps restarting this, the ram gfx card etc all works in another computer...

Alright guys, if anyones up for joing my Hamachi network for tigerwoods 2008 and playing, if a few people are up for a game join the channel Room Name : tigerwoods.UK Password : pga game on :)

I like you way of thinking, and now im considering putting two 120.2 rads, one in the front for the mobo (nb+sb) and a 120.2 in the rear of the case for the cpu alone. I guessing ill need two pumps? or can i run it all off one pump, would that fux the temps up? i spose having two seperate...

I like you way of thinking, and now im considering putting two 120.2 rads, one in the front for the mobo (nb+sb) and a 120.2 in the rear of the case for the cpu alone. I guessing ill need two pumps? or can i run it all off one pump, would that fux the temps up? i spose having two seperate...

Thermochill PA120.2 120mm Double Radiator; Alphacool Cape Coolplex Pro 25 Reservoir; Swiftech Laing D5 Vario MCP655 12V DC Pump; EK Supreme Clear Top (Socket A,754,939,AM2, 478 and LGA 775); So this would be the best setup to cool the e8500 at STUPIDLY high clocks?

No that block is for a normal 3870 not an 3870X2 it would not fit mate. and its against forum rules to post other e-tailers websites :)

Just looked at your sig, basicly the same kind clocks i want from my E8500, what do you have running in your loop and what are the temps please mate?

I was thinking more of a 220 or 360mm rad not a 120mm :o i dont think thats going to be good enough to get nice temps with 4ghz + clocks ?! Agreed on the D-Tek Block ive heard brilliant things about it. maybe need a bit more of a more power full pump and a bigger rad. Is the TFC better than...

well you wont go far wrong with the AC Freezer7 and the noctua northboard cooler.

I'm not sure if you want to replace the whole cooler or just the fan? but if your after replacing the whole cooler click me but its a bit expensive(compared to the cpu cooler), you could always just replace the fan tho? OCUK Have loads of 40mm - 70mm fans Click me

freezer pro is 12quid atm grab one of those ;)

Ive got an E8500, with the DFI X48 UT mobo. Its in a Antec 1200 case, and i want to watercool this little badboy. So guys its upto you to spec me the BEST watercooling loop JUST for the cpu. Im running my 4870's with the HR03-GT + 92mm Sharkloon silent eagle's, and Zalman ramsinks so the gfx...

you should be able to run 9x333 with stock volts and the stock cooler, like others said tho 60-65 is a nice target for loads temps. Mines @ 3.6ghz on a coolermaster 212 which is like 1*c worse than a Freezer 7 for 2 years in october